- Joined
- Aug 22, 2014
- Messages
- 17
- Motherboard
- ASUSTeK Computer INC. P8Z68-V PRO (LGA1155) 28
- CPU
- Intel Core i7 2600 @ 3.40GHz 42 Sandy Bridge 32nm Technology
- Graphics
- EVGA GTX 1050Ti 4GB
- Mac
- Classic Mac
- Mobile Phone
So all went super smooth with USB Installer and Sierra 10.12.X
I have seen loads of post about GTX450 and NvidaWeb drivers. Managed to install them but no luck in managing the card.
I am newbie so when I try to go to do this ... little over my head. Think I could do it if I can get to the path.
1. Mount EFI Partition - Are we talking about the USB Drive?
2. Open /Volumes/EFI/EFI/CLOVER/config.plist with text edit, Xcode, or Plist Editor Pro Can't find path
3. Edit as shown below:
Code (Text):
<key>SystemParameters</key>
<dict>
<key>InjectKexts</key>
<string>YES</string>
<key>InjectSystemID</key>
<true/>
<key>NvidiaWeb</key>
<true/>
</dict>
4. Remove Boot/Arguments/nvda_drv=1 if necessary
5. Save and reboot
Any ideas for help. So Close. Happy to get a new card that works with my install. This card is rather old now and I will be updating Intel Chip/RAM and SSD soon on this kit.
Kind Regards
Ivan
I have seen loads of post about GTX450 and NvidaWeb drivers. Managed to install them but no luck in managing the card.
I am newbie so when I try to go to do this ... little over my head. Think I could do it if I can get to the path.
1. Mount EFI Partition - Are we talking about the USB Drive?
2. Open /Volumes/EFI/EFI/CLOVER/config.plist with text edit, Xcode, or Plist Editor Pro Can't find path
3. Edit as shown below:
Code (Text):
<key>SystemParameters</key>
<dict>
<key>InjectKexts</key>
<string>YES</string>
<key>InjectSystemID</key>
<true/>
<key>NvidiaWeb</key>
<true/>
</dict>
4. Remove Boot/Arguments/nvda_drv=1 if necessary
5. Save and reboot
Any ideas for help. So Close. Happy to get a new card that works with my install. This card is rather old now and I will be updating Intel Chip/RAM and SSD soon on this kit.
Kind Regards
Ivan