- Joined
- Sep 1, 2014
- Messages
- 2,944
- Motherboard
- GA-H87N-WIFI
- CPU
- i7-4790S
- Graphics
- GT 740
- Mac
- Mobile Phone
Yeah, the ATI information is hardcoded into PEG0 in that DSDT. I don't much care for the approach of hardcoding stuff into a DSDT. It would be much easier to work with if the fixes were in individual SSDTs or Clover config or whatever.
For now, I'd try moving that DSDT.aml file out of your Clover config, and see if the machine can still boot. Best case, that fixes the problem. Worst case, you'll have to figure out all the differences between the native DSDT and your modified one, and apply only the changes needed to boot.
You might as well boot with nv_disable=1 on your first try, even though I would expect that to give you crummy graphics. If you get in at all, then reboot and try with nvda_drv=1 instead and see if that gives better graphics.
For now, I'd try moving that DSDT.aml file out of your Clover config, and see if the machine can still boot. Best case, that fixes the problem. Worst case, you'll have to figure out all the differences between the native DSDT and your modified one, and apply only the changes needed to boot.
You might as well boot with nv_disable=1 on your first try, even though I would expect that to give you crummy graphics. If you get in at all, then reboot and try with nvda_drv=1 instead and see if that gives better graphics.