{GREAT SUCCESS} - Yo Mang's Hack Pro - 3930K / GTX670 / Sabertooth X79 (56k Warn!)

[trent9645]

Nice. I have the H100 and the highest my overclocked temp got was 71 Celsius after running Prime95 for about an hour

 

[Midphase]

You're safe at a peak in the low 80's...beyond that it's asking for trouble, especially if you have extensive stress periods like 3D rendering and the like.

 

[trent9645]

ya. Well the overclock isn't working on Mac side. I tried to go higher to 4.5ghz and it didn't change on Mac. Maybe it's because im running Mavericks. I don't know. If I ever figure it out i'll post it on here.

 

[Midphase]

Overclock works, no doubt about it (unless you are using a non-K 3930 CPU).

Are you sure you're actually affecting the Base Clock multiplier and you have Speedstep turned off?

Can you post screenshots of your BIOS?

 

[trent9645]

Let me know if you need a screen shot of another part of bios

 

[Midphase]

Kinda strange, all your settings seem pretty spot on. Only difference is that instead of having the CPU VCORE Offset voltage option to Auto, I have mine set to 1.395

So with these settings, your Geekbench numbers aren't getting any better?

 

[trent9645]

Correct, i tried going up to 4.5ghz and it didn't change at all.

This were my instructions to install Mavericks

Quickstart > MultiBeast's Easy Beast

Drivers:

Without DSDT > ALC892
3rd Party SATA
3rd Party eSATA (have to do after restart)
Trim Enable > 10.9.0 TRIM Patch
IOACHIBlockStorageInjector
FakeSMC v5.3.820 Plugins
Intel- hnak’s appleintelE1000e v2.5.4d
AppleACPiPlatform Rollback > 10.8.1 Rollback
Patched AppleIntelCPUPowerManagement > OS x 10.9.0​

Customize:

Hibernate Mode - Desktop
Use KernelCache
Verbose Boot
1080p Display Mode​

Go To Extra Folder:
Make sure it looks like this (had to add the bold and underlined text)

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>No</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>darkwake=0 npci=0x2000 -v</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>"1920x1080x32"</string>
</dict>
</plist>


Install Using Kextbeast:

VoodooTSCSync.kext
GenericUSBXHCI.kext (Different than the one in MultiBeast)​

cudadriver

enable cuda for premiere and after effect
Premiere

Paste in Terminal

sudo nano /Applications/Adobe\ Premiere\ Pro\ CS6/Adobe\ Premiere\ Pro\ CS6.app/Contents/cuda_supported_cards.txt

press down arrow till you get an empty line
type the name of your graphics card "GeForce GTX 670"
press Control + X
Press Y
Press Enter​

After Effects

Paste in Terminal

sudo nano /Applications/Adobe\ After\ Effects\ CS6/Adobe\ After\ Effects\ CS6.app/Contents/raytracer_supported_cards.txt

press down arrow till you get an empty line
type the name of your graphics card "GeForce GTX 670"
press Control + X
Press Y
Press Enter​

Enable OpenCL
1) Download the file "libclh.dylib" from http://rghost.net/39181502

2) Navigate to /System/Library/Extensions and find the file "GeForceGLDriver.bundle"

3) Right click on this file and select "Show Package Contents"

4) Select "Contents" then "Mac OS" and you will find the original "libclh.dylib" file. Rename this "libclhBAK.dylib"

5) Copy the new "libclh.dylib" file you just downloaded, enter your password and restart your computer. Done!


And These were my overclock instructions

Turbo Ratio - By All Cores
By All cores - 42
Cpu Clock Gen filter - Enabled
Memory Frequency - ddr3-1600MHz
EPU Power saving mode - enabled
CPU Load-line Calibration - Medium
CPU Current Capability - 130%
VCCSA Load Line calibration - Regular
VCCSA Current Capability - 120 %
CPU Power Phase Control - Optimized
DRAM-AB Current Capability - 120%
Under CPU Power Management Configuration -
Enhance Intel SpeedStep Technology - disabled
CPU Ratio - 42
CPU C1E - disabled
CPU C3 report - disabled
CPU C6 report- disabled​

 

[Stork]

trent9645,
The current version of GenericUSBXHCI.kext (v1.2.7) is in MultiBeast v6.01

 

[Midphase]

What is GenericUSBXHCI.kext and why is it needed?

I've never installed it and my system's been running great....should I?

 

[Stork]

Some motherboards need this kext to get their USB 3 ports to work properly. If yours work, no need for this kext.