Contribute
Register

Gigabyte Z97 Gaming 3 Setup issues

Status
Not open for further replies.
stageshoot

stageshoot

Joined
Mar 30, 2013
Messages
14
Motherboard
i7 5930k Tower
CPU
i7 5930k
Graphics
GTX770
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. Android
Hi Guys

Having problems with installation on the following System

Gigabyte Z97 Gaming 3 Motherboard
i7 4790k
16Gb Vengence
Asus GTX 770

Anyone had any luck with a similar system who could shed some light. Get through inital install but hangs when rebooting via Unibeast to Hdd.
 
I just finished my build of a very similar setup. Actually the same motherboard

try to boot with -v -x and GraphicsEnabler=Yes.
 
OK, am just doing a full reinstall to get rid of any gremlins

Have updated to the Beta Bios F6d

All the guides say graphicsenabler=no for the 7 series cards.. ???
 
My bad . the graphics enabler is just for the integrated graphics. not necessary in your case.
Have you changed your bios setting like vt-d etc ?
 
Yep tried all that, redownloaded incase download was corrupt

but just goes to kernal panic once multibeast is installed and reboot

Sort of stuck now cannot get past that point
 
What mulitbeast options did you use?
 
OK - Starting to get somewhere.

Made some changes to Multibeast. as the guide I followed was setting as iMac rather than Mac Pro

Now set as macpro, and its booting in OS with no issues (Except Sound output)

Network is connected and working
Graphics is outputting at 4k to Montor no problem

Just no sound at moment, so need to look for a work around for that..
 
The sound was also an issue for me . I literally must of used mutlibeast about 5 times to install the kexts.
did you do the alc1150 and the series 9 fix option in multibeast for audio
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top