- Joined
- Nov 17, 2015
- Messages
- 256
- Motherboard
- Gigabyte Z490 Vision D
- CPU
- i9-10850K
- Graphics
- RX 6800 XT
- Mac
- Mobile Phone
Just an update for all those following from home...This just showed up on my Z490 Vision D hack. Should I reinstall 12.0.1? The OSX side of this Dual boot machine has been wildly unstable. OSX 12.0.1 freezes almost daily. The Windows 11 side runs like a champ w/ no issues. I'm convinced it's a software / config issue. I just update OpenCore to 0.7.6 and the only change I made to Casey's EFI was to remove boot argument agdpmod=pikera (for my Vega 64) and set AAPL,ig-platform-id to 0300C89B (for headless Comet Lake iGPU). Any advice would be appreciated I've been troubleshooting this build for a week and I'm stumped. My BIOS is exactly as specified by the guide, I'm on Firmware F5.
I flashed my BIOS from F5 to F20 as recommended by "lewys" and all my troubles have gone away.
Monterey 12.0.1 has been up and running flawlessly ever since. My Bluetooth issues have sorted themselves out as well.
For the record my Z490 Vision D has an Intel Core i9-10850K, 32GB of G.Skill Trident Z Neo RAM @ 3600MHz, WD_BLACK 500GB SN750 NVMe SSD, CORSAIR RM850X 850W Power Supply, Radeon Vega 64 Video Card and a Be Quiet Dark Rock Pro 4 (+ 3 case fans) to keep things chill. (it's idling at 34 degrees C)
I'm on OpenCore 0.7.6 running Monterey 12.0.1 & Windows 11.
Big Thanks to "Casey SJ" for the guide and a special shout out to "Lewys" for tip on F20...