Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

[canyondust]

@canyondust

I am not encouraging you to update the BIOS! Bravery is one thing, foolishness is another! +10 points for bravery, but -50 points for foolishness...

I appreciate the post! I have a backup system and a new MBP M1 Max, so if it doesn’t work I’m not stuck. And since I am in this position and can afford to test, it’s a bit of value I can bring to scene. Change my username to Canarydust.

 

[canyondust]

@canyondust

I am not encouraging you to update the BIOS! Bravery is one thing, foolishness is another! +10 points for bravery, but -50 points for foolishness...

P.S. Z490 Vision G Bios F21 is working fine withe OC 0.7.5 and OSX 11.6.1 on my rig!
(haven't thoroughly tested but it boots and doesn't do anything strange at idle/light use)

 

[CaseySJ]

P.S. Z490 Vision G Bios F21 is working fine withe OC 0.7.5 and OSX 11.6.1 on my rig!
(haven't thoroughly tested but it boots and doesn't do anything strange at idle/light use)

Okay +100 points for success!

Thank you for being the experimental subject. Does sleep and wake work properly? And Thunderbolt hot plug?

 

[canyondust]

Okay +100 points for success!

Thank you for being the experimental subject. Does sleep and wake work properly? And Thunderbolt hot plug?

I don't have a thunderbolt card (Vision G) so I can't speak to that. Sleep/wake seems to work fine as well. I'll do a deep sleep cycle tonight and see what happens (aka if my drives unmount as they are wont to do since sometime around 11.5)... but so far so good!

 

[sbushman18]

To be technically correct, 0D000000 is the layout-id, not device-id.

Yes. My mistake. I corrected my previous post. At any rate, seems Vision D has no audio until the value is added, so maybe the default EFI can be edited to include it?

I wonder if different versions of the motherboard come into play. BIOS I am using is F6 I believe.

 

[bruttonero]

Hi,

How do I change the setting in BIOS so I ca increase the memory speed from 2133 to 3200?

Thanks,
Michele

 

[Feartech]

Hi,

How do I change the setting in BIOS so I ca increase the memory speed from 2133 to 3200?

Thanks,
Michele

should be the XMP profile?

 

[bruttonero]

should be the XMP profile?

Yes, found it . Thanks

 

[canyondust]

I don't have a thunderbolt card (Vision G) so I can't speak to that. Sleep/wake seems to work fine as well. I'll do a deep sleep cycle tonight and see what happens (aka if my drives unmount as they are wont to do since sometime around 11.5)... but so far so good!

update: slept for 4 hours, wake from sleep was perfect and drives remained mounted. As NASA would say: All systems nominal.

 

[CaseySJ]

Yes. My mistake. I corrected my previous post. At any rate, seems Vision D has no audio until the value is added, so maybe the default EFI can be edited to include it?

I wonder if different versions of the motherboard come into play. BIOS I am using is F6 I believe.

I'm still trying to understand what the issue is. Will run some tests soon.