- Joined
- Sep 11, 2011
- Messages
- 75
- Motherboard
- Gigabyte Z490 Vision D
- CPU
- i9-10850K
- Graphics
- VisionTek Radeon RX 560
- Mac
- Mobile Phone
Please try CMOS Reset by following the procedure in Gigabyte user manual. It will be necessary to configure BIOS parameters again afterwards, starting always with F7 (Load Optimized Defaults).I'm having lots of trouble with my system. I did a test install of Big Sur which went very well but I then wanted to switch to a larger disk, add more disks, and add Linux for dual-boot. I'm finding that it's impossible to get into the boot menu or the BIOS. The system just hangs at the logo screen. With absolutely everything unplugged, NVME drives removed, even graphics card removed, I can get into the BIOS screen - sometimes. This is with BIOS F20. Should I consider downgrading to F5? Or is there some other solution to this issue?
Any pointers appreciated!
Please use OpenCore Configurator to make sure all config.plist items are set up correctly. Then perform CMOS Reset by following procedure in Gigabyte user manual. When computer starts, go to BIOS Setup and configure all BIOS parameters again, starting with F7 (Load Optimized Defaults).after upgrading to 12.0.1, i find the sound disappears.
anybody know how to solve this issue?
View attachment 533939
Regarding Thunderbolt, please see Step 12 of Post 1:CaseySJ
I finally got my system working!!! I still have two problems. When I check my system report under Thunderbolt it says no drivers. I don't a Thunderbolt device yet so I assume by the system report its not working unless I'm wrong. Second issue is I have a Grace Design m905 monitor controller I use for audio connected via USB. It shows up in Audio but it says no output channels. I assumed this device is plug and play so I believe theres something wrong in the audio maybe. Any suggestions?
No need to switch to iMac19,1. What you have now (iMac20,2) is good.Running Monterey 12.1 Public Beta with OC 0.7.4 without any problems so far. I have a few questions maybe you can answer me.
1. I am using now iMac20,2, should I switch to 19,1?
Please RestrictEvents documentation page here for instructions. If you have trouble with the procedure, please let us know.2. What geekbenchmarks do you achieve with 10700K in monterey? Did you overclocked CPU or tweaked somehow?
3. Is there any working guide how to change i9 with i7 in "About this mac" info?
Please try HWMonitorSMC2 from here. In the settings page, enable IOKit Monitoring.4. I am using RX 570 GPU and my app iStat Menus shows GPU 97-99% usage mostly, while iStatistica shows 0-1% usage. Any idea what's wrong here?
Just read the 0C 0.7.5 mini-guide first.5. Is there anything I should know before upgrading OC to 0.7.5?
Please read the first section of OC 0.7.5 mini-guide.6. I did windows reinstall and I have installed my WIN11 to separate SSD disk with dedicated EFI partition for windows (DISK2) and I have macos DISK1 with dedicated EFI partition for mac. From now on I can't boot to Windows 11 from OC menu anymore. I can only boot to windows if I select from BIOS boot menu - Windows Boot Loader. Is it possible to make Windows DISK2 bootable from OC again? ( I mean I can see disk in OC menu, but when I select it it shows Preparing for automatic repair and just stuck there for infinite time.
Hopefully someone can answer this. I've been charging my iPhone 13 via MagSafe connected to a wall GaN-based wall charger. I am seriously impressed by these new GaN-based charging modules.7. Anybody know how fast iPhone 12 Pro charging is via thunderbolt to lightning cable?
I chose 32GB RAM, which is available with both M1 Pro and M1 Max. The M1 Pro chip delivers longer battery life. If 14 or 16 GPU cores are enough for your workflow, the M1 Pro with 32GB could be an option that is not only great, but excessively great! No other laptop provides this level of performance. If more performance is needed, it's better to wait for new iMacPro or new Mac mini or new Mac Pro!@CaseySJ which CPU and how much RAM do you have in your new MBP 14? I can't decide between 16GB and 32GB RAM for M1 Pro 16". Does 32GB for M1 Pro even an option?
Nice!PS. Added WiFi speed test with BCM94360CSAX WiFi Card, speed is amazing I don't thing that I ever even need IntelWiFi card to work natively ..
Bingo! Absolutely it would.... Would a USB-c to Displayport cable work out of the Thunderbolt ports?