HI all,
I know that the recommendations when it comes to BIOS is to stick to F5. Is anybody running their config with F20? The reason I am asking is that, when booting my system with my 6800XT, I have no video until macOS is loaded. I mentioned recently that I fixed it by running 2 PCIe power cables to the video card rather than one with a splitter, and also unplugging/plugging the monitor but it worked only once. I tried to reboot the system so that I could boot Windows 10 but same problem reappeared. Reading several posts in the net, a few people fixed the issue by flashing the BIOS to the latest version (not necessary on a Z490). Just curious to see if people on this forum are running the Z490 with the latest BIOS which is F20. Thanks.