CaseySJ
Moderator
- Joined
- Nov 11, 2018
- Messages
- 22,208
- Motherboard
- Asus ProArt Z690-Creator
- CPU
- i7-12700K
- Graphics
- RX 6800 XT
- Mac
- Classic Mac
- Mobile Phone
** OpenCore 0.6.5 EFI for Z490 Vision D **
Supports both Catalina and Big Sur
Please do not quote this post in its entirely. Use a link instead.
Requires OpenCore Configurator 2.22.0.0 or Newer
NOTE: If you are using OpenIntelWireless to drive the on-board Intel AX201 WiFi/BT module, please jump to this post instead (updated for OpenCore 0.6.5).
Supports both Catalina and Big Sur
Please do not quote this post in its entirely. Use a link instead.
Requires OpenCore Configurator 2.22.0.0 or Newer
NOTE: If you are using OpenIntelWireless to drive the on-board Intel AX201 WiFi/BT module, please jump to this post instead (updated for OpenCore 0.6.5).
The formal release of OpenCore 0.6.5 has arrived, along with an update of WhateverGreen, AppleALC, NVMeFix, and IntelMausi.
This EFI contains the following changes:
Bootloader / Kexts:
All of the items listed below are official builds.
- OpenCore 0.6.5
- WhateverGreen 1.4.6
- AppleALC 1.5.6
- NVMeFix 1.0.5
- IntelMausi 1.0.5
- Misc --> Security --> SecureBootModel --> Disabled (change to Default for OpenIntelWireless)
- Misc --> Security --> BlackListAppleUpdate --> Enabled
- Find a USB flash disk with an EFI partition, or format the USB flash disk in Disk Utility with Scheme = GUID Partition Map and Format = MacOS Extended (Journaled).
- Mount EFI partition of the USB flash disk.
- Download the attached ZIP into the top level of the EFI partition of the USB flash disk. When the file is unzipped, there will be a folder called OC-065-VISION-D.
- Rename this folder to EFI, otherwise the system will not boot.
- Use HackinDROM to transfer PlatformInfo from existing OpenCore config.plist to new version. Please follow the guide by clicking here and see screenshot below.
- Reboot and press F12 at the BIOS Splash Screen. When the BIOS Boot Menu (not OpenCore Picker) appears, select the USB flash disk.
- Warning: It is necessary to Reset NVRAM one time prior to booting macOS. This can be done by pressing spacebar at the OpenCore Picker and choosing Reset NVRAM. On multi-boot systems, select the default startup disk in System Preferences --> Startup Disk.
- At the OpenCore 0.6.5 Picker menu, select and boot the internal macOS disk.
- If everything works correctly, copy the new OpenCore EFI folder from the USB flash disk to the EFI partition of the main macOS SSD.
- If you are using a custom Thunderbolt SSDT or any other custom SSDTs or Kexts, please update your config.plist accordingly.
- During startup or reboot, the Gigabyte splash screen may take several seconds to clear, which means the OpenCore Picker GUI will take more time to appear. If this happens, the delay could be fixed by removing AudioDxe.efi from the OpenCore config.plist.
- 08 Jan 2021: If your system does not boot with the standard OC-065-VISION-D ZIP, try OC-065-VISION-D-FAKE-CPU ZIP instead. Most users should stay with the first version.
Attachments
Last edited: