Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

[MacArthur]

Hi,
I installed the 13.3 Public beta 4 today and I lost both WiFi (I'm using an Apple WifiBluetooh card taken out of an old MacBook) and one of the 2 Ethernet ports (en0) which I think is the 2.5GbE LAN chip.
The other ethernet port seems to be working and a USB WiFI adapter is also working.

I probably need an updated kext of something but I'm not sure where to start.

I'm attaching my config.plist without serials. Running OC 0.8.9

Thanks
Miche

This happened to me with the ß2 version. It was solved with ß3 and I just installed ß4 and everything is still smooth.
Very strange...

 

[bruttonero]

Remove Dart=0
Set DisableIOMapper to Yes or disable VT-d in BIOS.
Basically, undo the process to enable AppleVTD.

IntelMausi.kext is required for Intel I219 ethernet.

@juseon123 Worked!! Thanks

 

[juseon123]

Updated to Ventura 13.3 release, but still no WiFi and I219 ethernet when AppleVTD is activated. Is anyone experiencing the same?

 

[bruttonero]

Updated to Ventura 13.3 release, but still no WiFi and I219 ethernet when AppleVTD is activated. Is anyone experiencing the same?

I have the same experience. I just left VT-D off.

 

[cliffDeane]

Same issue with Wi-Fi disabled on latest update. I need VTD enabled to run antelope software. Any suggestions?

 

[juseon123]

Same issue with Wi-Fi disabled on latest update. I need VTD enabled to run antelope software. Any suggestions?

You maybe able to downgrade to 13.3 beta 2 which did not have this issue. It is still downloadable from the Apple server.

 

[CaseySJ]

You maybe able to downgrade to 13.3 beta 2 which did not have this issue. It is still downloadable from the Apple server.

On my system the following behavior is seen with Ventura 13.3:

AppleVTD enabled:

• Intel i225-V 2.5GbE port works fine; I have Revision 0x0002 (screenshot below)
• Broadcom WiFi/BT does not connect, nor does it see any SSIDs
  • This used to work in Ventura 13.2
  • This problem does not happen with the same Fenvi card on other Hackintoshes that I own (Asus Z690, Gigabyte Z390)

AppleVTD disabled:

• Intel 225-V 2.5GbE will only work if we inject AppleIntelI210Ethernet.kext from Monterey and use boot argument e1000=0
• Broadcom WiFi/BT connects and works properly

Attached is a newer SSDT-DMAR.aml, but the outcome is the same.

 

[cliffDeane]

On my system the following behavior is seen with Ventura 13.3:

AppleVTD enabled:

• Intel i225-V 2.5GbE port works fine; I have Revision 0x0002 (screenshot below)
• Broadcom WiFi/BT does not connect, nor does it see any SSIDs
  • This used to work in Ventura 13.2
  • This problem does not happen with the same Fenvi card on other Hackintoshes that I own (Asus Z690, Gigabyte Z390)

AppleVTD disabled:

• Intel 225-V 2.5GbE will only work if we inject AppleIntelI210Ethernet.kext from Monterey and use boot argument e1000=0
• Broadcom WiFi/BT connects and works properly

View attachment 565073
Attached is a newer SSDT-DMAR.aml, but the outcome is the same.

Thank you,
I will try that updated dmar table and respond with my result. Really hope see are able to figure this out.

 

[juseon123]

On my system the following behavior is seen with Ventura 13.3:

AppleVTD enabled:

• Intel i225-V 2.5GbE port works fine; I have Revision 0x0002 (screenshot below)
• Broadcom WiFi/BT does not connect, nor does it see any SSIDs
  • This used to work in Ventura 13.2
  • This problem does not happen with the same Fenvi card on other Hackintoshes that I own (Asus Z690, Gigabyte Z390)

For me as well and it's good to know that Z390Desi is not affected by this.
Could you confirm that Intel I219 ethernet is also not working?

 

[cliffDeane]

On my system the following behavior is seen with Ventura 13.3:

AppleVTD enabled:

• Intel i225-V 2.5GbE port works fine; I have Revision 0x0002 (screenshot below)
• Broadcom WiFi/BT does not connect, nor does it see any SSIDs
  • This used to work in Ventura 13.2
  • This problem does not happen with the same Fenvi card on other Hackintoshes that I own (Asus Z690, Gigabyte Z390)

AppleVTD disabled:

• Intel 225-V 2.5GbE will only work if we inject AppleIntelI210Ethernet.kext from Monterey and use boot argument e1000=0
• Broadcom WiFi/BT connects and works properly

View attachment 565073
Attached is a newer SSDT-DMAR.aml, but the outcome is the same.

No joy trying this method. It works if I disable the VT-D but I do need that for antelope software. Ethernet is working fine but I need wifi for air drop.
Hopefully we can find a patch for this