- Joined
- Aug 3, 2010
- Messages
- 1,105
- Motherboard
- Gigabyte Z68
- CPU
- i7-2660k
- Graphics
- GTX 560Ti
- Mac
- Classic Mac
- Mobile Phone
First, I apologize for asking what I believe is a simple question to answer. I know that there has to be information out there as well, but I did search for awhile, but with no clear answer. I apologize if I missed the answer.
My question is about running 1600MHz RAM on a UD2 board. I realize that part of the specs of the UD2 indicate that the supported RAM speeds are: DDR3 2200/1333/1066/800. However, those spec sheets aren't always complete.
So, my RAM is running at 1333MHz, and my multiplier goes to 10, not 12. I play to up my BCLK to 160 anyways, so it will work out in the end, but I want to know if there is a way to run my RAM at stock speed on this board with overclocking.
Thanks all!
My question is about running 1600MHz RAM on a UD2 board. I realize that part of the specs of the UD2 indicate that the supported RAM speeds are: DDR3 2200/1333/1066/800. However, those spec sheets aren't always complete.
So, my RAM is running at 1333MHz, and my multiplier goes to 10, not 12. I play to up my BCLK to 160 anyways, so it will work out in the end, but I want to know if there is a way to run my RAM at stock speed on this board with overclocking.
Thanks all!