- Joined
- Feb 15, 2011
- Messages
- 13
- Motherboard
- 10.7
- CPU
- i3
- Graphics
- Nvidia
- Mac
- Classic Mac
- Mobile Phone
I have a semi-functional XFX HD 6670 card setup.
I’m running Lion because none of the solutions I found on the forum worked on SL.
With chimera 1.5.3, my card would be detected as HD 6xxx in the System Information Utility and the DVD player would fail to open. Also typing the AtiConfig=framebuffer command at boot appeared to make no difference at all. The only thing that helped me was using the modified files from Shurt. I tried them all and the result were very similar to those of rfhall
Most framebuffers would just result on my monitor losing video signal after boot except for;
Junca & Mangabey which would cause my system to automatically load the default ati framebuffer
Ipomea worked ok but setting my default monitor resolution would create a black bar on the left of my screen.
Pithecia (which is the one I’m using) works ok, GB and DVD player both work and my card is correctly detected as “Ati Radeon HD 6670”. But now my computer detects two monitors (had to mirror them on system preferences) and HD movies or HD flash videos show some flikery bars on scenes with a lot of movement. I haven’t yet tried what Martytoof suggests
Can anyone please tell me how to disable AppleGraphicsPowerManagement.kext? Should I just delete it?
Lastly, installing chimera 1.5.4 would again cause a black screen after boot. I must now use both AtiConfig=Pithecia in boot.plist and the Pithecia boot file from Shurt to load the Pithecia framebuffer. Here’s my bdmesg and a screenshot of my system in case anyone can point me what the hell am I doing wrong. I only have a VGA monitor so that might be the source of all my troubles.
I’m running Lion because none of the solutions I found on the forum worked on SL.
With chimera 1.5.3, my card would be detected as HD 6xxx in the System Information Utility and the DVD player would fail to open. Also typing the AtiConfig=framebuffer command at boot appeared to make no difference at all. The only thing that helped me was using the modified files from Shurt. I tried them all and the result were very similar to those of rfhall
rfhall said:Not sure how I missed this thread while searching but thanks to eelHead who referred me to it I also have been able to get by Gigabyte AMD Radeon HD 6670 working. I used the zip file that Shurt had attached to an earlier post. I also have this exact card with 1gb DDR3 as referenced by Shurt, however when I tried Bulrushes, figuring Shurt had already done all the work I ended up with a black screen. I proceeded to try each one individually (never tried GraphicsEnabler=No), and on my card I found with the exception of those listed below they all resulted in a black screen under SL 10.6.8.
Junca & Mangabey both booted but still displayed HD Ni40 as the hardware
Ipomoea & Pithecia both booted and displayed HD 6670 as the hardware, both worked with DVD Player. I’m currently using Ipomoea and I’m preparing to start the transition to Lion.
I’ve notice some folks having problems still, all I can say at this point is don’t give up just because Bulrushes didn’t work for you. I spent quite a few hours going through the list and trying each one but now I do have a fully configured graphics card.
Thanks for all the good work Shurt!!!
Most framebuffers would just result on my monitor losing video signal after boot except for;
Junca & Mangabey which would cause my system to automatically load the default ati framebuffer
Ipomea worked ok but setting my default monitor resolution would create a black bar on the left of my screen.
Pithecia (which is the one I’m using) works ok, GB and DVD player both work and my card is correctly detected as “Ati Radeon HD 6670”. But now my computer detects two monitors (had to mirror them on system preferences) and HD movies or HD flash videos show some flikery bars on scenes with a lot of movement. I haven’t yet tried what Martytoof suggests
Martytoof said:It's worth pointing out that I was getting horrible frameratres with fullscreen HD Flash content until I disabled AppleGraphicsPowerManagement.kext. Flash was skipping left and right, dropping frames. Now it's smooth as butter.
Don't know if anyone else with a 6670 is having this problem, but that fixed it for me.
Can anyone please tell me how to disable AppleGraphicsPowerManagement.kext? Should I just delete it?
Lastly, installing chimera 1.5.4 would again cause a black screen after boot. I must now use both AtiConfig=Pithecia in boot.plist and the Pithecia boot file from Shurt to load the Pithecia framebuffer. Here’s my bdmesg and a screenshot of my system in case anyone can point me what the hell am I doing wrong. I only have a VGA monitor so that might be the source of all my troubles.
Code:
Chameleon 1.5.4 (svn-r1394) [2011-09-07 17:13:31]
msr(301): platform_info 60011f00
msr(305): flex_ratio 00010000
Unusable flex ratio detected. Patched MSR now 00000000
Sticking with [BCLK: 99Mhz, Bus-Ratio: 310]
CPU: Brand String: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz
CPU: Vendor/Family/ExtFamily: 0x756e6547/0x6/0x0
CPU: Model/ExtModel/Stepping: 0x2a/0x2/0x7
CPU: MaxCoef/CurrCoef: 0x0/0x1f
CPU: MaxDiv/CurrDiv: 0x0/0x0
CPU: TSCFreq: 3093MHz
CPU: FSBFreq: 99MHz
CPU: CPUFreq: 3093MHz
CPU: NoCores/NoThreads: 2/4
CPU: Features: 0x000002ff
Attempting to read GPT
Read GPT
Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B
Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC
Reading GPT partition 3, type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 545 bytes.
Invalid mach magic 0x2
Module 'Symbols.dylib' by 'Chameleon' Loaded.
Description: Chameleon symbols for linking
Version: 0
Compat: 0
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/theme.plist] 2688 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/background.png] 4204 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/logo.png] 21872 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_generic.png] 5375 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus.png] 3645 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_ext3.png] 7094 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_fat16.png] 5375 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_fat32.png] 5375 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_ntfs.png] 4176 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_cdrom.png] 5627 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_selection.png] 10744 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_scroll_prev.png] 271 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_scroll_next.png] 268 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_boot.png] 1747 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_verbose.png] 4116 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_ignore_caches.png] 4051 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_single_user.png] 4114 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_memory_info.png] 1634 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_video_info.png] 1593 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_help.png] 1711 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_verbose_disabled.png] 4101 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_ignore_caches_disabled.png] 4037 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_single_user_disabled.png] 4100 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_selection.png] 323 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/progress_bar.png] 372 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/progress_bar_background.png] 233 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/text_scroll_prev.png] 252 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/text_scroll_next.png] 255 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/font_console.png] 3499 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/font_small.png] 6244 bytes.
Read HFS+ file: [hd(0,2)/Library/Preferences/SystemConfiguration/com.apple.Boot.plist] 290 bytes.
Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 545 bytes.
Setting boot-uuid to: 615FEBB8-96BA-35CD-8BB9-1B7CC7F089C6
Read HFS+ file: [hd(0,2)/System/Library/CoreServices/SystemVersion.plist] 478 bytes.
Loading Darwin 10.7
Loading kernel mach_kernel
Read HFS+ file: [hd(0,2)/mach_kernel] 4096 bytes.
Read HFS+ file: [hd(0,2)/mach_kernel] 7610708 bytes.
Using PCI-Root-UID value: 1
Framebuffer @0xE0000000 MMIO @0xFBDC0000 I/O Port @0x0000EE00 ROM Addr @0x00000000
ATI card POSTed, reading VBIOS from legacy space
Framebuffer set to: Pithecia using AtiConfig=Pithecia
Number of ports set to: 3 using framebuffer's default.
ATI Turks AMD Radeon HD 6670 1024MB (Pithecia) [1002:6758] (subsys [1682:3181]):: PciRoot(0x1)/Pci(0x1,0x0)/Pci(0x0,0x0)
LAN Controller [10ec:8168] :: PciRoot(0x1)/Pci(0x1c,0x6)/Pci(0x0,0x0)
Setting up lan keys
Read HFS+ file: [hd(0,2)/Extra/smbios.plist] 468 bytes.
SMBus CmdReg: 0x3
Scanning SMBus [8086:1c22], mmio: 0xfbffb004, ioport: 0x500, hostc: 0x1
SPD[0] (size): 146 @0x50
Slot: 0 Type 24 4096MB (DDR3 SDRAM) 1333MHz Vendor=Kingston
PartNo=9905403-038.A00G SerialNo=872EBF97
SPD[0] (size): 255 @0x51
SPD[0] (size): 146 @0x52
Slot: 2 Type 24 4096MB (DDR3 SDRAM) 1333MHz Vendor=Kingston
PartNo=9905403-038.A00G SerialNo=882EC578
SPD[0] (size): 255 @0x53
SPD[0] (size): 255 @0x54
SPD[0] (size): 255 @0x55
SPD[0] (size): 255 @0x56
SPD[0] (size): 255 @0x57
CPU is Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz, family 0x6, model 0x2a
Type: 0, Length: 24, Handle: 0x0
BIOSInformation:
vendor: Apple Inc.
version: MultiBeast.tonymacx86.com
releaseDate: 11/06/2009
Type: 1, Length: 27, Handle: 0x1
SystemInformation:
manufacturer: Apple Inc.
productName: MacPro3,1
version: 1.0
serialNumber: G88451235J4
uuid: 00000000-0000-0000-0000-1C6F65D88D9E
wakeupReason: 0x6
skuNumber: ?
family: Mac Pro
Type: 2, Length: 8, Handle: 0x2
BaseBoard:
manufacturer: Apple Inc.
product: Mac-F42C88C8
version: x.x
serialNumber: ?
assetTagNumber:
locationInChassis:
boardType: 0x20
Type: 3, Length: 17, Handle: 0x3
SystemEnclosure:
manufacturer: Gigabyte Technology Co., Ltd.
type: 3
version:
serialNumber:
assetTagNumber:
Type: 4, Length: 35, Handle: 0x4
ProcessorInformation:
socketDesignation: Socket 1155
processorType: 3
processorFamily: 0x1
manufacturer: Intel
processorID: 0x206A7
processorVersion: Intel(R) Core(TM) i3-2100 CPU
externalClock: 99MHz
maximumClock: 3093MHz
currentClock: 3100MHz
serialNumber: ?
assetTag: ?
partNumber: ?
Type: 5, Length: 24, Handle: 0x5
Type: 6, Length: 12, Handle: 0x6
Type: 6, Length: 12, Handle: 0x7
Type: 6, Length: 12, Handle: 0x8
Type: 6, Length: 12, Handle: 0x9
Type: 7, Length: 19, Handle: 0xa
Type: 7, Length: 19, Handle: 0xb
Type: 8, Length: 9, Handle: 0xc
Type: 8, Length: 9, Handle: 0xd
Type: 8, Length: 9, Handle: 0xe
Type: 8, Length: 9, Handle: 0xf
Type: 8, Length: 9, Handle: 0x10
Type: 8, Length: 9, Handle: 0x11
Type: 8, Length: 9, Handle: 0x12
Type: 8, Length: 9, Handle: 0x13
Type: 8, Length: 9, Handle: 0x14
Type: 8, Length: 9, Handle: 0x15
Type: 13, Length: 22, Handle: 0x16
Type: 16, Length: 15, Handle: 0x17
Type: 17, Length: 27, Handle: 0x18
MemoryDevice:
deviceLocator: A0
bankLocator: Bank0/1
memoryType: DDR3
memorySpeed: 1333MHz
manufacturer: Kingston
serialNumber: 872EBF97
assetTag: ?
partNumber: 9905403-038.A00G
Type: 17, Length: 27, Handle: 0x19
MemoryDevice:
deviceLocator: A1
bankLocator: Bank2/3
memoryType: RAM
memorySpeed: 0MHz
manufacturer: N/A
serialNumber: N/A
assetTag: ?
partNumber: N/A
Type: 17, Length: 27, Handle: 0x1a
MemoryDevice:
deviceLocator: A2
bankLocator: Bank4/5
memoryType: DDR3
memorySpeed: 1333MHz
manufacturer: Kingston
serialNumber: 882EC578
assetTag: ?
partNumber: 9905403-038.A00G
Type: 17, Length: 27, Handle: 0x1b
MemoryDevice:
deviceLocator: A3
bankLocator: Bank6/7
memoryType: RAM
memorySpeed: 0MHz
manufacturer: N/A
serialNumber: N/A
assetTag: ?
partNumber: N/A
Type: 19, Length: 15, Handle: 0x1c
Type: 20, Length: 19, Handle: 0x1d
Type: 20, Length: 19, Handle: 0x1e
Type: 20, Length: 19, Handle: 0x1f
Type: 20, Length: 19, Handle: 0x20
Type: 32, Length: 11, Handle: 0x21
Type: 64, Length: 13, Handle: 0x22
Type: 131, Length: 6, Handle: 0x22
AppleProcessorType:
ProcessorType: 0x901
Type: 127, Length: 4, Handle: 0x23