- Joined
- Sep 12, 2010
- Messages
- 39
- Motherboard
- GA-H77-DS3 Rev.1.1 - F7
- CPU
- core i3-3225
- Graphics
- RADEON 5570
- Mac
- Classic Mac
- Mobile Phone
hi,
this is my second build from this site buildlist and ... this not so glorious i hope.
First let me say that with my first build Z68X-UD3H-B3 i never reach perfection : sleep work not working properly (usb issu ewith apple alu keyboard)
And now i buy from the list of thids site :
GA-H77-DS3,
Core i3-3525,
8 Go DDR3 PC12800,
(my old ATI 5770, which i remove from my build ...it can be that .)
building usb boot key from tonymac ... and always : black screenblocked at AppleACPIPlateformExpert ...."unable to find driver for this plateform" IOPlateformExpert
the only to have install screen was to build Lion usb stick (with unibeast) but with this i can't view any drive of my build ....
thanks for your help,
i try bios setup (F7 and ahci, xhci, timer etc)
at boot i type : PCIRootUID=0 -v and nothing work ...
put stick on usb 2.0 port etc ...
important thing : GA-H77-DS3H is a rev 1.1 !
update : install F7 UEFI .... and stick with ML boot. IT'S WORK (for boot and install via stick usb phase)
i follow this guide for UEFI setting : http://www.tonymacx86.com/99-quick-guide-configuring-uefi-gigabyte-s-7-series-lga-1155-boards.html
after 4 hours i'ts seem to go in the good direction :
i'm following this guided :
http://www.tonymacx86.com/mountain-...h-v1-0-hd6870-ssd-128gb-10-8-2-dual-boot.html
very hard very hard built ....
the first boot with the usb stick was good , but now i cannot boot on hard drive (multibeast pass has been done) nor with usb stick (and hd in instant menu) !!
i don't understand why : GA-H77-DS3 and core i3-3225 is in the build list !!!!
this is my second build from this site buildlist and ... this not so glorious i hope.
First let me say that with my first build Z68X-UD3H-B3 i never reach perfection : sleep work not working properly (usb issu ewith apple alu keyboard)
And now i buy from the list of thids site :
GA-H77-DS3,
Core i3-3525,
8 Go DDR3 PC12800,
(my old ATI 5770, which i remove from my build ...it can be that .)
building usb boot key from tonymac ... and always : black screenblocked at AppleACPIPlateformExpert ...."unable to find driver for this plateform" IOPlateformExpert
the only to have install screen was to build Lion usb stick (with unibeast) but with this i can't view any drive of my build ....
thanks for your help,
i try bios setup (F7 and ahci, xhci, timer etc)
at boot i type : PCIRootUID=0 -v and nothing work ...
put stick on usb 2.0 port etc ...
important thing : GA-H77-DS3H is a rev 1.1 !
update : install F7 UEFI .... and stick with ML boot. IT'S WORK (for boot and install via stick usb phase)
i follow this guide for UEFI setting : http://www.tonymacx86.com/99-quick-guide-configuring-uefi-gigabyte-s-7-series-lga-1155-boards.html
after 4 hours i'ts seem to go in the good direction :
i'm following this guided :
http://www.tonymacx86.com/mountain-...h-v1-0-hd6870-ssd-128gb-10-8-2-dual-boot.html
very hard very hard built ....
the first boot with the usb stick was good , but now i cannot boot on hard drive (multibeast pass has been done) nor with usb stick (and hd in instant menu) !!
i don't understand why : GA-H77-DS3 and core i3-3225 is in the build list !!!!