- Joined
- Dec 10, 2010
- Messages
- 1,378
- Motherboard
- Gigabyte Z390 Aorus Elite
- CPU
- i9-9900K
- Graphics
- RX 6600 XT
- Mobile Phone
Hello everybody. I have observed this behavior in the sleep of my hack:
Current configuration obtained with pmset -g is:
(sleep prevented by sharingd) is shown after full or incomplete sleep.
I have OpenCore 0.7.0 but this behavior happens for several versions of OpenCore. Now I'm in Big Sur 11.4 with MacPro7,1 but it happens also with iMac19,1 and iMacPro1,1 and with Catalina.
The structure of the current EFI folder is:
Attached my current config.plist.
It happens to someone else? What can be the cause that the first sleep works well and the next ones are not complete? What parameter or setting can I look for related to this issue?
Thanks.
- first time it goes to sleep since boot (from Energy Saver / from power button / from Terminal command) it goes well with lights and fans completely off
- wakes up from sleep with a single touch of keyboard or mouse or with a press of power button
- next times it goes to sleep it does not turn off lights and fans, screen turns off but fans keep spinning and graphics card light stays on
- if I restart the PC, the cycle starts again and the first time it goes to sleep everything is as expected, but only the first time.
Code:
Assertion status system-wide:
BackgroundTask 0
ApplePushServiceTask 0
UserIsActive 1
PreventUserIdleDisplaySleep 0
PreventSystemSleep 0
ExternalMedia 0
InternalPreventDisplaySleep 1
PreventUserIdleSystemSleep 1
NetworkClientActive 0
Listed by owning process:
pid 147(WindowServer): [0x00000f7d000982d7] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle serviceID:1000004e1 name:AppleHIDKeyboardEve product:Apple Keyboard eventType:3"
Timeout will fire in 60 secs Action=TimeoutActionRelease
pid 415(sharingd): [0x00000fc400018346] 00:06:27 PreventUserIdleSystemSleep named: "Handoff"
pid 91(powerd): [0x0000113500108395] 00:00:18 InternalPreventDisplaySleep named: "com.apple.powermanagement.delayDisplayOff"
Timeout will fire in 42 secs Action=TimeoutActionTurnOff
Kernel Assertions: 0x4=USB
id=502 level=255 0x4=USB creat=14/6/21 8:47 description=com.apple.usb.externaldevice.14620000 owner=BRCM20702 Hub
id=504 level=255 0x4=USB creat=14/6/21 8:49 description=com.apple.usb.externaldevice.14840000 owner=Keyboard Hub
id=506 level=255 0x4=USB creat=14/6/21 8:54 description=com.apple.usb.externaldevice.14843000 owner=USB Optical Mouse
Idle sleep preventers: IODisplayWrangler
Current configuration obtained with pmset -g is:
Code:
autorestart 0
Sleep On Power Button 1
hibernatefile /var/vm/sleepimage
powernap 0
networkoversleep 0
disksleep 15
sleep 20 (sleep prevented by sharingd)
hibernatemode 0
ttyskeepawake 0
displaysleep 15
tcpkeepalive 0
womp 0
I have OpenCore 0.7.0 but this behavior happens for several versions of OpenCore. Now I'm in Big Sur 11.4 with MacPro7,1 but it happens also with iMac19,1 and iMacPro1,1 and with Catalina.
The structure of the current EFI folder is:
Code:
├── ACPI
│ ├── SSDT-AWAC-DISABLE.aml
│ ├── SSDT-EC-USBX.aml
│ ├── SSDT-PLUG.aml
│ └── SSDT-PMC.aml
├── Drivers
│ ├── CrScreenshotDxe.efi
│ ├── OpenCanopy.efi
│ ├── OpenHfsPlus.efi
│ └── OpenRuntime.efi
├── Kexts
│ ├── CPUFriend.kext
│ ├── CPUFriendDataProvider.kext
│ ├── IntelMausi.kext
│ ├── Lilu.kext
│ ├── NVMeFix.kext
│ ├── RestrictEvents.kext│
│ ├── SMCProcessor.kext
│ ├── SMCSuperIO.kext
│ ├── USBToolBox.kext
│ ├── UTBMap.kext
│ ├── VirtualSMC.kext
│ ├── WhateverGreen.kext
├── OpenCore.efi
├── Resources
│ ├── Audio
│ ├── Font
│ ├── Image
│ └── Label
├── Tools
│ ├── CsrUtil.efi
│ └── OpenShell.efi
└── config.plist
Attached my current config.plist.
It happens to someone else? What can be the cause that the first sleep works well and the next ones are not complete? What parameter or setting can I look for related to this issue?
Thanks.