Contribute
Register

[FIX] HD4200/HD4400/HD4600/HD5600 on 10.11+

Cool, thanks for the quick response.
To be honest I've hacked my config about too much and probability should start from scratch.
 
sonicmule said:
Cool, thanks for the quick response.
To be honest I've hacked my config about too much and probability should start from scratch.
Click to expand...

Your current problem is only that you have DropOem=false.

But your config.plist is not a good one for moving forward. The ones in the guide are much better to start with...
 
RehabMan said:
Your current problem is only that you have DropOem=false.

But your config.plist is not a good one for moving forward. The ones in the guide are much better to start with...
Click to expand...

Ok, after starting again, I managed to get a decent usb wifi adapter driver and starting off with your config_HD4600_4400_4200.plist, I now have full qe/ci YEY!

But the menu items in the title bar are looking a little fuzzy as if the biplanes aren't lining up.
Drop down menus are fine though. I'm going to have a look on the forum if this is a known problem, but any pointers to what this may be?

Many thanks
 
sonicmule said:
Ok, after starting again, I managed to get a decent usb wifi adapter driver and starting off with your config_HD4600_4400_4200.plist, I now have full qe/ci YEY!

But the menu items in the title bar are looking a little fuzzy as if the biplanes aren't lining up.
Drop down menus are fine though. I'm going to have a look on the forum if this is a known problem, but any pointers to what this may be?

Many thanks
Click to expand...

Read post #1, "Problem Reporting".
 
RehabMan said:
Intel HD Graphics on El Capitan

OS X supports a range of Intel HD Graphics devices, however not all the variants present in hackintosh devices are supported out of the box.

Haswell HD4200/HD4400/HD4600: Must inject device-id=0x0412.
config.plist/Devices/FakeID/IntelGFX=0x04128086

Broadwell HD5600 (10.11.0/10.11.1 only): Must inject device-id=0x1626.
config.plist/Devices/FakeID/IntelGFX=016268086

Note: These settings are already in the plist files linked from my Clover guide...

http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html


FakePCIID Installation

In addition, the Haswell graphics accelerator kext (AppleIntelHD5000Graphics.kext) checks the PCI device-id against a set of known values. Because the HD4200/HD4400/HD4600(mobile) values are not accommodated by this check, you must install FakePCIID kexts for PCI device-id spoofing.

The latest release of FakePCIID can be found here:
https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads

The source code is located at:
https://github.com/RehabMan/OS-X-Fake-PCI-ID

Install both FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext (originally FakePCIID_HD4600_HD4400.kext) in /System/Library/Extensions, EFI/Clover/kexts, or /Library/Extensions (10.11+).

--

Note: This post, simplified for Clover only 10.11, based on original by the-darkvoid for Yosemite: http://www.tonymacx86.com/yosemite-...tel-hd4200-hd4400-hd4600-mobile-yosemite.html.


Problem Reporting

Post ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Also, post EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory, especially if you have an overabundance of themes installed. Provide only EFI/Clover, not the entire EFI folder.

Also post output of:
Code: 
sudo touch /System/Library/Extensions && sudo kextcache -u /
Click to expand...




Im confused on ow to do this, could anyone help me? Im using the hd 4600 graphics.
 
but I'm using a desktop, will it make a difference?
 
Cam2363 said:
but I'm using a desktop, will it make a difference?
Click to expand...

This guide is not for desktops. This entire forum is for laptops (please note title of the forum... "El Capitan Laptop Support").

Your CPU has HD4600. It is supported OOB (requiring only AAPL,ig-platform-id injection, config.plist/Graphics/Inject/Intel=true).
 
RehabMan said:
Read post #1, "Problem Reporting".
Click to expand...

The menu bar problem fixed itself!
All working properly on my Asus,
Now on to working out how to create a patch for the battery level - see you in another thread maybe!

Many thanks
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top