- Nov 27, 2011
- i5 4690k
- GTX 750
- Classic Mac
- Mobile Phone
Thanks for reply!On the clover boot screen press F4 on your keyboard.
Boot into OS X and mount your EFI partition.
Your DSDT will be in the EFI/CLOVER/ACPI/ORIG folder.
Edit it and save it into the EFI/CLOVER/ACPI/PATCHED folder as DSDT.aml
I also have a Z87X-UD5H but my USB 3 ports do not work. They work as USB 2 but as soon as I plug a Hard drive in nothing happens. I'm not using any DSDT.Your injector looks to me far to busy, do you really have that many ports? I've found with mine that without the injector USB2 was fine so my injector only mentions USB3 ports.
Also i noticed on your screen shot that your USB3 controller isn't an intel one its a renesas, which from what I've read is natively supported.
Also no you don't need a DSDT for this fix UNLESS you have problems with no usb ports working after waking from sleep or the system automatically waking from sleep when a usb3 device is plugged in.
"but after following these steps" What steps are you talking about? You look to be having the same problem that I'm with my UD5H board.Just want to chime in and say thank you, this worked for me on my XPS 8700. The ports were all working, but would not detect any USB3.0 devices, only 2.0 ones. But after following these steps, all my drives came back! Speed tests will say whether it was 100% effective or not, but having the drives come back alone was worth it.
Please add your hardware to your profile, it will help others help you, and it is part of the Rules of the site..."but after following these steps" What steps are you talking about? You look to be having the same problem that I'm with my UD5H board.
It's not just you but I think it would be helpful if everyone could point to a guide or at least say what they did to fix it. Also what kind of board they have.
- Profiles need to contain at least your primary system to assist others with helping you.