- Joined
- Feb 2, 2012
- Messages
- 8
- Motherboard
- Gigabyte H67MA-D2H-B3
- CPU
- i5-2500K
- Graphics
- GT 210
- Mac
- Mobile Phone
Hi Guys,
I am trying to get El Capitan to work (system in signature). A few years ago I had successfully running 10.8 on this system without any problems. However, 10.11 seems to be a little more tricky. So here is all that I tried until now:
I booted up with UniBeast with Clover and installed everything without any problems. After booting into El Capitan with the USB (also without any problems) almost everything seemed to work OOB, except for the Audio. I started up MultiBeast and went with the QuickInstall option:
ALC892 Driver
Inject NVIDIA
Bootloader Clover UEFI
I put the DSDT for my MB (downloaded here) into EFI > Clover > ACPI > patched
So far so good. After rebooting and starting from HDD I get to the loading screen with the apple logo and that's it. Here's for the troubleshooting:
-v: [PCI configuration begin]
-v -x: [PCI configuration begin], sometimes 'RTC: Only single Ram Ba'
npci=0x1000 OR npci=0x2000 OR npci=0x3000: all [PCI configuration begin]
After checking NullCPUPowerManagement still nothing: [PCI configuration begin]
Booting from USB worked fine however, so I booted up from USB, mounted both EFI partitions and just copied the USB Clover folder to the EFI partition of the hard drive. Same problem. I wonder, why it boots (almost) perfectly from USB, but not after installing Clover...
Appreciate any help. Thanks guys.
Cheers,
AnotherGuyver
I am trying to get El Capitan to work (system in signature). A few years ago I had successfully running 10.8 on this system without any problems. However, 10.11 seems to be a little more tricky. So here is all that I tried until now:
I booted up with UniBeast with Clover and installed everything without any problems. After booting into El Capitan with the USB (also without any problems) almost everything seemed to work OOB, except for the Audio. I started up MultiBeast and went with the QuickInstall option:
ALC892 Driver
Inject NVIDIA
Bootloader Clover UEFI
I put the DSDT for my MB (downloaded here) into EFI > Clover > ACPI > patched
So far so good. After rebooting and starting from HDD I get to the loading screen with the apple logo and that's it. Here's for the troubleshooting:
-v: [PCI configuration begin]
-v -x: [PCI configuration begin], sometimes 'RTC: Only single Ram Ba'
npci=0x1000 OR npci=0x2000 OR npci=0x3000: all [PCI configuration begin]
After checking NullCPUPowerManagement still nothing: [PCI configuration begin]
Booting from USB worked fine however, so I booted up from USB, mounted both EFI partitions and just copied the USB Clover folder to the EFI partition of the hard drive. Same problem. I wonder, why it boots (almost) perfectly from USB, but not after installing Clover...
Appreciate any help. Thanks guys.
Cheers,
AnotherGuyver