- Joined
- Jan 28, 2012
- Messages
- 6
- Motherboard
- Gigabyte GA-H97M-D3H
- CPU
- Intel i7 4790 16GB RAM
- Graphics
- Geforce gv-n1070ixoc-8gd
- Mac
- Mobile Phone
I've recently upgraded to High Sierra from El Capitan.
After installing for 40 mins (on an SSD drive) and few restarts, I ended up with an exclamation image on the screen. When I booted with -v it gave the cryptic error "does printf work?" with some other error messages. It all directed to the OsxAptioFix2Drv.efi file somehow. I've been searching around the forums. But none of the solutions worked for me.
Here's what I have in my drivers64UEFI folder:
apfs.efi
FSInject-64.efi
HFSPlus.efi
OsxAptioFix2Drv-64.efi
OsxFatBinaryDrv-64.efi
And here's what I have in my "Kexts/Other" folder:
FakeSMC.kext (it's a new one)
Lilu.kext
NullCPUPowerManagement.kext
NvidiaGraphicsFixup.kext
OS-X-USB-Inject-All-master
RealtekRTL81xx.kext
USBInjectAll.kext
What I've tried so far:
I've tried changing the OsxAptioFix2Drv-64.efi file to OsxAptioFixDrv-64.efi, OsxAptioFix2Drv-free2000.efi and Test2-2016.efi
None of them worked.
My boot args are as follows:
dart=0 kext-dev-mode=1 -lilubeta -igfxbeta -alcbeta
I have Nvidia Web drivers injected in the config file.
I tried boot args without the lilu stuff, and even tried deleting all of them and just booting with -v only. Tried with -nv_disable=1 as well.
Nothing worked.
I sometimes get different errors, especially when I try with different OscAptio files. But there's always the "does printf work?" error at the end and it hangs up.
I'm using clover boot loader with the version v2.4k r4359
When I'm trying to boot there are three more boot options, one of them is the recover option.
The other two options start installing something with the apple sign and everything but it restarts after and nothing happens, it seems like a restart loop.
I'm out of options right now. I'd rather get this one working without a clean install if possible.
I can access my EFI partition from windows so I'm attaching my EFI folder here just in case.
Thanks in advance.
After installing for 40 mins (on an SSD drive) and few restarts, I ended up with an exclamation image on the screen. When I booted with -v it gave the cryptic error "does printf work?" with some other error messages. It all directed to the OsxAptioFix2Drv.efi file somehow. I've been searching around the forums. But none of the solutions worked for me.
Here's what I have in my drivers64UEFI folder:
apfs.efi
FSInject-64.efi
HFSPlus.efi
OsxAptioFix2Drv-64.efi
OsxFatBinaryDrv-64.efi
And here's what I have in my "Kexts/Other" folder:
FakeSMC.kext (it's a new one)
Lilu.kext
NullCPUPowerManagement.kext
NvidiaGraphicsFixup.kext
OS-X-USB-Inject-All-master
RealtekRTL81xx.kext
USBInjectAll.kext
What I've tried so far:
I've tried changing the OsxAptioFix2Drv-64.efi file to OsxAptioFixDrv-64.efi, OsxAptioFix2Drv-free2000.efi and Test2-2016.efi
None of them worked.
My boot args are as follows:
dart=0 kext-dev-mode=1 -lilubeta -igfxbeta -alcbeta
I have Nvidia Web drivers injected in the config file.
I tried boot args without the lilu stuff, and even tried deleting all of them and just booting with -v only. Tried with -nv_disable=1 as well.
Nothing worked.
I sometimes get different errors, especially when I try with different OscAptio files. But there's always the "does printf work?" error at the end and it hangs up.
I'm using clover boot loader with the version v2.4k r4359
When I'm trying to boot there are three more boot options, one of them is the recover option.
The other two options start installing something with the apple sign and everything but it restarts after and nothing happens, it seems like a restart loop.
I'm out of options right now. I'd rather get this one working without a clean install if possible.
I can access my EFI partition from windows so I'm attaching my EFI folder here just in case.
Thanks in advance.