- Joined
- Nov 17, 2017
- Messages
- 14
- Motherboard
- EVGA x299 Micro ATX
- CPU
- i9 7900x
- Graphics
- GTX 1080 Ti
- Mac
- Mobile Phone
Hey guys, I need some help. I am trying to install macOS Catalina on my Dell XPS 13 9380, and I am having a few problems. I am using a guide on GitHub made by someone else, here is the link. Below is my EFI. Anyways, the first time while following the guide, I was able to boot into the installer, and successfully install macOS Catalina. Unfortunately, after a few reboots after installation, it presented me with this error.
AMF: No slide values are usable! Falling back to 0 with 0x0C5F5000 bytes!
ERROR allocating 0x1376e pages at 0x0000000005f00000
Couldn't allocate runtime area
Boot failed; will sleep for 10 seconds before exiting...
I remember seeing this error before after installation, but when I rebooted my laptop, it fixed the issue, and on next reboot, it gave me that same error, and now it will not even boot, and will hang on this. I have tried different installations, and EFIs, but they all hang on this error. I have tried to change my slide value to slide=0, slide=128, slide=255, and none worked, it just presented with a different kernel error. Also, I downgraded my BIOS to 1.8.0 (the version recommended in the guide), and I was still resented with the same error. Anyways, help would be appreciated.
Thank you.
Edit: I was unsure if I needed to mention the specs of my Laptop, but just in case, here they are.
CPU: 8th Generation Intel® Core™ i7-8565U Processor
Graphics: Intel® UHD Graphics 620
RAM: 8GB LPDDR3 2133MHz.
Storage: 256GB M.2 PCIe NVMe Solid State Drive
AMF: No slide values are usable! Falling back to 0 with 0x0C5F5000 bytes!
ERROR allocating 0x1376e pages at 0x0000000005f00000
Couldn't allocate runtime area
Boot failed; will sleep for 10 seconds before exiting...
I remember seeing this error before after installation, but when I rebooted my laptop, it fixed the issue, and on next reboot, it gave me that same error, and now it will not even boot, and will hang on this. I have tried different installations, and EFIs, but they all hang on this error. I have tried to change my slide value to slide=0, slide=128, slide=255, and none worked, it just presented with a different kernel error. Also, I downgraded my BIOS to 1.8.0 (the version recommended in the guide), and I was still resented with the same error. Anyways, help would be appreciated.
Thank you.
Edit: I was unsure if I needed to mention the specs of my Laptop, but just in case, here they are.
CPU: 8th Generation Intel® Core™ i7-8565U Processor
Graphics: Intel® UHD Graphics 620
RAM: 8GB LPDDR3 2133MHz.
Storage: 256GB M.2 PCIe NVMe Solid State Drive
Attachments
Last edited: