- Joined
- Mar 19, 2019
- Messages
- 164
- Motherboard
- Lenovo 20QQS44R02
- CPU
- E-2276M/ CM246
- Graphics
- UHD P630 + RTX 5000
- Mobile Phone
I'm using intel HD630 as my 1060 ins't compatible. Ive unlocked my bios and disabled the 1060 in the BIOS and it's drawing no power or heat, I've also liquid metaled my laptop and the CPU temps are almost always great (30-35c idle). Except under hard load because the fans don't ramp properly. I've tried the macs fan control app and it doesn't recognize my fans. Does anyone know how I can properly set my fan curves? Simply running R20 I'm hitting 95 and thermal throttling with the fans barely kicking in.
Just as a side note, It's dual boot windows and with MSI dragoncenter my temps never reach over 70C with my custom fan curves, even with the GPU and CPU running at the same time, which share the same copper heat spreader.
will attach logs after reboot.
Just as a side note, It's dual boot windows and with MSI dragoncenter my temps never reach over 70C with my custom fan curves, even with the GPU and CPU running at the same time, which share the same copper heat spreader.
will attach logs after reboot.