[CLOSED] Adding ATI card IDs to Chimera 1.5 ATI.c

njoy.it · Sep 21, 2011

Re: Adding ATI card IDs to ATI.c - update (8-Sept)

Hi!!, sorry for my english, I'm from Spain.
At first time thanks for this post, now i have mi "snow leopard 10.6.6" running at 80%.

I have a Ati Shappire HD3850 512mb DDR3 PCI-E http://www.appinformatica.com/tarjetas-graficas-vga-pcie-ati-hd-3850-512mb-sapphire.php with a Asus P5KPL motherboard.
I follow the next steps:
First I installed all aplications (multibeast with chimera, etc.), next, at S/L/E, on Ati3800Controller.kext I put the ID "1002 9505" of my card and I reboot, It don't start.
Well, I reboot in safe mode and I deleted all AtiRadeonX2000.kext (it have the id of my graphic card inside), I reboot and :clap:

I'm very happy, now I have the two outs of my graphic card running and it recognised my monitors. But, I have a small problem, at "hardware/graphics/displays don't show the "Ati HD3850", show the generic "HD3800 controller". Ok it's not problem for me, the really problem is that I tested the QE/CI adding a widget and it don't make the effect. I test another test with playing a movie on VLC player but, I have sound only.
Any help for me??

Thanks in advance!! :thumbup:

njoy.it · Sep 23, 2011

Re: Adding ATI card IDs to ATI.c - update (8-Sept)

A question, often is it necessary to delete the file AtiRadeonx2000 to run the graphics card?, Or should work with the AtiRadeonx2000 + Ati3800Controller?
I don't have any ATY_init or similar kext, I only have the original kext from SL 10.6.8 for make it run but I added the ID in Ati3800Controller and I deleted the AtiRadeonx2000...

:?:

budiosx · Sep 23, 2011

Re: Adding ATI card IDs to ATI.c - update (8-Sept)

notshy you helped me a lot
the problem is when i use ATiConfig to Hoolock my ati 5450 get qe/cl and right frame buffer but the resolution is 1280x768 although my display resolution is 1366x768

Framebuffer @0xE0000000 MMIO @0xFBDC0000 I/O Port @0x0000EE00 ROM Addr @0x00000000
ATI card POSTed, reading VBIOS from legacy space
Framebuffer set to: Hoolock using AtiConfig=Hoolock
Number of ports set to: 3 using framebuffer's default.
ATI Cedar ATI Radeon HD 5450 512MB (Hoolock) [1002:68f9] (subsys [1787:2291]):: PciRoot(0x1)/Pci(0x1,0x0)/Pci(0x0,0x0)

ioreg | grep ATY
| | | | +-o ATY,Hoolock@0 <class AtiFbStub, id 0x100000224, registered, matched, active, busy 0 (106 ms), retain 7>
| | | | | +-o ATY_Hoolock <class ATIFramebuffer, id 0x100000249, registered, matched, active, busy 0 (25 ms), retain 16>
| | | | +-o ATY,Hoolock@1 <class AtiFbStub, id 0x100000225, registered, matched, active, busy 0 (4 ms), retain 7>
| | | | | +-o ATY_Hoolock <class ATIFramebuffer, id 0x100000269, registered, matched, active, busy 0 (3 ms), retain 13>
| | | | +-o ATY,Hoolock@2 <class AtiFbStub, id 0x100000226, registered, matched, active, busy 0 (3 ms), retain 7>
| | | | | +-o ATY_Hoolock <class ATIFramebuffer, id 0x10000026f, registered, matched, active, busy 0 (3 ms), retain 13>

i tried all other ati configs and set graphics mode to 1366x768 with no success
the same problem the resolution is not right, so what i can do to get my display 1366x768 :?:

budiosx · Sep 25, 2011

Re: Adding ATI card IDs to ATI.c - update (8-Sept)

my display settings i can't find my resolution 1366x768

Thakali · Oct 1, 2011

Re: Adding ATI card IDs to ATI.c - update (8-Sept)

Ok im tired

i dont knw what im doing wrong.

My card a HD 5570 is detected as ATI Radeon HD 5000 in the system profiler. Device ID is there in the ATI5000Controller.kext file. I tried all the framebuffers of which 2 of them crashed. geekbench works..chess works...dvd player - Nope! Its also crashing Ableton live.
Did i miss something? Please help.

Edit: im running 10.6.8. Easybeast.

tomipapa · Oct 1, 2011

Re: Adding ATI card IDs to ATI.c - update (8-Sept)

Thakali said:
Ok im tired i dont knw what im doing wrong.

My card a HD 5570 is detected as ATI Radeon HD 5000 in the system profiler. Device ID is there in the ATI5000Controller.kext file. I tried all the framebuffers of which 2 of them crashed. geekbench works..chess works...dvd player - Nope! Its also crashing Ableton live.
Did i miss something? Please help.

Edit: im running 10.6.8. Easybeast.

I guess your DVD Player doesn't work because QE/CI is not enabled properly. Please check using "ioreg | grep ATI" command that ATIRadeonX3000.kext is bound to your card?

ThakaIi · Oct 1, 2011

Re: Adding ATI card IDs to ATI.c - update (8-Sept)

This is wt i get..

Code:

    | |   |   | +-o ATI5000Controller  <class ATI5000Controller, id 0x10000028b$
    | |   |   | | +-o ATY_ATY,RadeonFramebuffer  <class ATIFramebuffer, id 0x10$
    | |   |   | | +-o ATY_ATY,RadeonFramebuffer  <class ATIFramebuffer, id 0x10$
    | |   |   | | +-o ATY_ATY,RadeonFramebuffer  <class ATIFramebuffer, id 0x10$
    | |   |   | +-o ATISupport  <class ATISupport, id 0x10000028c, registered, $
    | |   |   | +-o ATIRadeonX3000  <class ATIRadeonX3000, id 0x10000028e, regi$
    | |   |   |   +-o ATIR8002DContext  <class ATIR8002DContext, id 0x1000003a2$
    | |   |   |   +-o ATIR8002DContext  <class ATIR8002DContext, id 0x1000003a4$
    | |   |   |   +-o ATIR8002DContext  <class ATIR8002DContext, id 0x1000003a6$
    | |   |   |   +-o ATIR800Device  <class ATIR800Device, id 0x1000003ab, !reg$
    | |   |   |   +-o ATIR800GLContext  <class ATIR800GLContext, id 0x1000003ac$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003bc, !r$
    | |   |   |   +-o ATIR800GLContext  <class ATIR800GLContext, id 0x1000003bd$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003c0, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003c1, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003d3, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x10000042e, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x100000467, !r$
    | |   |   |   +-o ATIR800Device  <class ATIR800Device, id 0x100000468, !reg$
    | |   |   |   +-o ATIR800GLContext  <class ATIR800GLContext, id 0x100000469$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x10000047b, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x10000047c, !r$

tomipapa · Oct 1, 2011

Re: Adding ATI card IDs to ATI.c - update (8-Sept)

ThakaIi said:

This is wt i get..

Code:

    | |   |   | +-o ATI5000Controller  <class ATI5000Controller, id 0x10000028b$
    | |   |   | | +-o ATY_ATY,RadeonFramebuffer  <class ATIFramebuffer, id 0x10$
    | |   |   | | +-o ATY_ATY,RadeonFramebuffer  <class ATIFramebuffer, id 0x10$
    | |   |   | | +-o ATY_ATY,RadeonFramebuffer  <class ATIFramebuffer, id 0x10$
    | |   |   | +-o ATISupport  <class ATISupport, id 0x10000028c, registered, $
    | |   |   | +-o ATIRadeonX3000  <class ATIRadeonX3000, id 0x10000028e, regi$
    | |   |   |   +-o ATIR8002DContext  <class ATIR8002DContext, id 0x1000003a2$
    | |   |   |   +-o ATIR8002DContext  <class ATIR8002DContext, id 0x1000003a4$
    | |   |   |   +-o ATIR8002DContext  <class ATIR8002DContext, id 0x1000003a6$
    | |   |   |   +-o ATIR800Device  <class ATIR800Device, id 0x1000003ab, !reg$
    | |   |   |   +-o ATIR800GLContext  <class ATIR800GLContext, id 0x1000003ac$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003bc, !r$
    | |   |   |   +-o ATIR800GLContext  <class ATIR800GLContext, id 0x1000003bd$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003c0, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003c1, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003d3, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x10000042e, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x100000467, !r$
    | |   |   |   +-o ATIR800Device  <class ATIR800Device, id 0x100000468, !reg$
    | |   |   |   +-o ATIR800GLContext  <class ATIR800GLContext, id 0x100000469$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x10000047b, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x10000047c, !r$

System Profiler :-

Everything looks fine, but as far as I can see for some reason you get the standard ATI frame buffer loaded and that doesn't support QE/CI. Do you have GE=yes in your configuration?

ThakaIi · Oct 1, 2011

Re: Adding ATI card IDs to ATI.c - update (8-Sept)

tomipapa said:

ThakaIi said:

This is wt i get..

Code:

    | |   |   | +-o ATI5000Controller  <class ATI5000Controller, id 0x10000028b$
    | |   |   | | +-o ATY_ATY,RadeonFramebuffer  <class ATIFramebuffer, id 0x10$
    | |   |   | | +-o ATY_ATY,RadeonFramebuffer  <class ATIFramebuffer, id 0x10$
    | |   |   | | +-o ATY_ATY,RadeonFramebuffer  <class ATIFramebuffer, id 0x10$
    | |   |   | +-o ATISupport  <class ATISupport, id 0x10000028c, registered, $
    | |   |   | +-o ATIRadeonX3000  <class ATIRadeonX3000, id 0x10000028e, regi$
    | |   |   |   +-o ATIR8002DContext  <class ATIR8002DContext, id 0x1000003a2$
    | |   |   |   +-o ATIR8002DContext  <class ATIR8002DContext, id 0x1000003a4$
    | |   |   |   +-o ATIR8002DContext  <class ATIR8002DContext, id 0x1000003a6$
    | |   |   |   +-o ATIR800Device  <class ATIR800Device, id 0x1000003ab, !reg$
    | |   |   |   +-o ATIR800GLContext  <class ATIR800GLContext, id 0x1000003ac$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003bc, !r$
    | |   |   |   +-o ATIR800GLContext  <class ATIR800GLContext, id 0x1000003bd$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003c0, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003c1, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x1000003d3, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x10000042e, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x100000467, !r$
    | |   |   |   +-o ATIR800Device  <class ATIR800Device, id 0x100000468, !reg$
    | |   |   |   +-o ATIR800GLContext  <class ATIR800GLContext, id 0x100000469$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x10000047b, !r$
    | |   |   |   +-o ATIR800Surface  <class ATIR800Surface, id 0x10000047c, !r$

System Profiler :-

Everything looks fine, but as far as I can see for some reason you get the standard ATI frame buffer loaded and that doesn't support QE/CI. Do you have GE=yes in your configuration?

Yes.

Did i miss anything here?

<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>arch=i386 npci=0x2000</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>

ThakaIi · Oct 2, 2011

Re: Adding ATI card IDs to ATI.c - update (8-Sept)

Anyone? help?

Search

[CLOSED] Adding ATI card IDs to Chimera 1.5 ATI.c

njoy.it

njoy.it

budiosx

budiosx

Thakali

tomipapa

ThakaIi

tomipapa

ThakaIi

ThakaIi

Forum

Guides

Downloads