Cant reach Install screen Dell Optiplex 790

[Chickengangster]

Hello, first off here are my specs. Dell Optiplex 790
Core i5-2400
4gb ram NO VIDEO CARD
Dell optiplex motherboard
1TB Baracuda 7200 RPM Drive

When I try to boot into the install Mac OS option with clover "Version 4045" it loads about 45% on the status bar with the apple logo and then gets stuck. I have let this go for very long and it does not progress any further I have tried several times and it stops at the same point every time.

I have tried the verbose option with safe mode and I get the text error shown.

If I do safe mode only it stops at the same point as when I just try to boot normally to the install screen.

I have went through the bios and anything it says to change is not an option to change.

I have tried re making the Install USB 3 times, I am using legacy boot.

Any help would be greatly appreciated as this is my first attempt at doing this.

If you need more information let me know

Thank you ahead of time!

 

[BreBo]

The integrated Intel HD Graphics 2000 is not supported.
You will need a dedicated GPU.

 

[creams]

Which cheap low profile card would be good?
ATI RADEON HD2400 256MB?
MSI GeForce GT 710 2GB
Maybe some other?

 

[Yuliaan]

Well, in the mini- version of the 790, you can't use a gpu, there's no space for it. I've got nearly the same Problem, but I'd been able to install MacOS, but when i've try to boot the installed OS it also stopped loading.