Booting Problems

[sergio140]

Hi, I am trying to install High Sierra but it is near impossible... It stucks at booting, the system reboots when apple logo is loading. The Hardware is:
Z370 AORUS Ultra Gaming Wifi, I8700 and dedicated Graphics Card Gigabyte GForce GTX 1050TI OC 4GB DDR5, 16GB RAM Kingston HyperX Fury (2x8Gb). Crucial MX300 SSD 275Gb.

Here are the bios settings I used:

1. Save & Exit → Load Optimized Defaults
2. M.I.T. → Advanced Memory Settings Extreme Memory Profile(X.M.P.) : Profile1
3. BIOS → Fast Boot : Disabled
4. BIOS → LAN PXE Boot Option ROM : Disabled
5. BIOS → Storage Boot Option Control : UEFI
6. Peripherals → Trusted Computing → Security Device Support : Disable
7. Peripherals → Network Stack Configuration → Network Stack : Disabled
8. Peripherals → USB Configuration → Legacy USB Support : Auto
9. Peripherals → USB Configuration → XHCI Hand-off : Enabled
10. Chipset → Vt-d : Disabled
11. Chipset → Wake on LAN Enable : Disabled
12. Chipset → IOAPIC 24-119 Entries : Enabled

I tried to boot with the internal graphics card adding:

1. Peripherals → Initial Display Output : IGFX
2. Chipset → Integrated Graphics : Enabled
3. Chipset → DVMT Pre-Allocated :128M (if this setting isn’t showing then: 1. Set Integrated Graphics: Enabled. 2. Save and Exit BIOS by pressing F10. 3. Reenter BIOS upon computer restart and it should be there.

But I have the same output.

I attach a Picture of the verbose output.

I appreciate if somebody could help me.Thanks in advance.

 

[BreBo]

I attach a Picture of the verbose output.

Unfortunately any relevant information has scrolled off the top of the screen.
Make a video of the boot process and extract the frames showing the kernel panic.

 

[sergio140]

Unfortunately any relevant information has scrolled off the top of the screen.
Make a video of the boot process and extract the frames showing the kernel panic.

Hi, thanks for your reply, here are 3 screenshots at booting.

Waiting for your help. Thanks again

 

[sergio140]

Any help?

 

[Gigamaxx]

Any help?

Try adding USBInjectallkext to clover/kext/Other folder. It’s where you should also have FakeSMCkext.

Disable internal graphics and use the Nvidia card boot with nv_disable=1. You can use the space bar to set that.

 

[sergio140]

Try adding USBInjectallkext to clover/kext/Other folder. It’s where you should also have FakeSMCkext.

Disable internal graphics and use the Nvidia card boot with nv_disable=1. You can use the space bar to set that.

Ok, I've downloaded USBInjectall.kext from RehabMan but I got the same, the system restarts and don't reach the installation page.

I have FakeSMC.kext on that path.

Is that USBInjectall.kext correct?. Thanks

 

[Feartech]

Ok, where can I find USBInjectall.kext? or I have to build my own one?
Yes, I have FakeSMC.kext on that path.

Thanks for your help.

https://github.com/RehabMan/OS-X-USB-Inject-All

 

[sergio140]

https://github.com/RehabMan/OS-X-USB-Inject-All

Yes, I found it, but I found in a different webpage the .kext file, Is that valid or I have to build my own one? Sorry but I'm a bit lost.

Thanks

 

[Feartech]

Yes, I found it, but I found in a different webpage the .kext file, Is that valid or I have to build my own one? Sorry but I'm a bit lost.

Thanks

the link i gave you, scroll down until you get to the download links

you will have to read

 

[sergio140]

the link i gave you, scroll down until you get to the download links

you will have to read

Yes, You are right, I have to read more... That was the page I found myself, I downloaded RehabMan-USBInjectAll-2018-0822.zip, unzipped it and put USBInjectall.kext into clover/kext/Other folder, but I have the same, I didn't reach the installation webpage.

Sorry for my ignorance and thanks for your time and your help.

edit: I attach here some pictures of the verbose output: