Contribute
Register

Boot stuck at 0.5% - Apple logo displayed

Status
Not open for further replies.
KnightR1dr

KnightR1dr

Joined
Jun 5, 2017
Messages
6
Motherboard
Dell PowerEdge T20
CPU
Intel Xeon E3-1225v3
Graphics
Intel HD Graphics P4600 / GTX 1050
Mac
  1. MacBook
Hmm.

This is probably not a supported setup, but I decided to give it a try of course :)

It's a Dell PowerEdge T20, configured with:
  • Intel Xeon E3-1225 v3 CPU (3.20GHz)
  • Intel C226 Chipset
  • Intel HD Graphics P4600
  • Intel I217 LAN adapter
  • Corsair Force 3 SSD disk
  • 2 x 4Gb RAM
Anyone with experience with this (chipset)? Or should I just forget about it?

The clover boots nicely
View media item 189049
... but is stuck a few seconds later:
216236-e6cc4ec6969faa11beafc563f5d58baa.jpg


No activity on the USB drive either.

Any suggestions?

Kr, Bjorn Dirchsen
 
KnightR1dr said:
Anyone with experience with this (chipset)? Or should I just forget about it?
Click to expand...
My ThinkServer has the C226 chipset with the same Ethernet controller and it works really well.

In order to capture any useful diagnostic information you must boot in verbose mode.
 
@KnightR1dr, please update your profile (personal details) with your Motherboard or Make/Model, CPU and Graphics Card.
The Rules said:
Profiles need to contain at least your primary system to assist others with helping you.
Click to expand...
 
P1LGRIM said:
My ThinkServer has the C226 chipset with the same Ethernet controller and it works really well.

In order to capture any useful diagnostic information you must boot in verbose mode.
Click to expand...
Ok. I'll try boot into verbose mode and post the result. Thx,
 
KnightR1dr said:
Ok. Booted in verbose mode.
Click to expand...
You can attach your images using the Upload a File button when you post.

How is it connected to the monitor ?
 
P1LGRIM said:
You can attach your images using the Upload a File button when you post.

How is it connected to the monitor ?
Click to expand...
The screenshots are from the PC when connected to the Nvidia card. I've tried to use the built-in card (without the Nvidia card installed. The result is more or less the same. Random halts during boot.
 
KnightR1dr said:
The screenshots are from the PC when connected to the Nvidia card. I've tried to use the built-in card (without the Nvidia card installed. The result is more or less the same. Random halts during boot.
Click to expand...
I cannot begin to help you if I don't know your current configuration.
How is it connected to the monitor ?
 
P1LGRIM said:
I cannot begin to help you if I don't know your current configuration.
How is it connected to the monitor ?
Click to expand...
Using the built-in graphics adapter via DP to DP cable to a 27" monitor. No Nvidia card installed (to minimize the number of problems).
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top