- Joined
- May 2, 2013
- Messages
- 15
- Mac
- Classic Mac
- Mobile Phone
Hello,
I got my Mavericks up and running like a charm now, only thing I would like to have is Bluetooth.
My Bluetooth Adapter is:
Qualcomm Atheros AR3012 Bluetooth 4.0 + HS
class=0xE0, subclass=0x01, vendor=0x0CF3, product=0x3004
And the problem is as follows:
In the bluetooth settings tab i have "Bluetooth: On" but a greyed out button "Turn Bluetooth Off", also it is mentioned that my device is discoverable.
In the system information I have
The reality is:
My device is not discoverable to others and it cannot find any devices (Magic Mouse for example).
What I tried:
1. Setting the ControllerPowerState manually via:
-> no change
2. RehabMan's IOath3kfrmwr.kext -> no change (though I'm not sure if I did it right, installed it once as kext but also tried it via the clover kext folder)
3. Some general bluetooth fix for 10.9 by Edwin_3930K on insanelymac in this post: http://www.insanelymac.com/forum/topic/289871-bluetooth-stuck-in-on-state-and-not-working/
which also didn't work.
I'm out of options, every other solutions I could find are just other ways of doing one of the above 3 things.
Thanks for your help!
I got my Mavericks up and running like a charm now, only thing I would like to have is Bluetooth.
My Bluetooth Adapter is:
Qualcomm Atheros AR3012 Bluetooth 4.0 + HS
class=0xE0, subclass=0x01, vendor=0x0CF3, product=0x3004
And the problem is as follows:
In the bluetooth settings tab i have "Bluetooth: On" but a greyed out button "Turn Bluetooth Off", also it is mentioned that my device is discoverable.
In the system information I have
Code:
[FONT=Lucida Grande]Apple Bluetooth Software Version: 4.2.0f6 12982[/FONT]
[FONT=Lucida Grande] Hardware Settings:[/FONT]
[FONT=Lucida Grande] Address: [/FONT]
[FONT=Lucida Grande] Manufacturer: Qualcomm Atheros[/FONT]
[FONT=Lucida Grande] Name: b[/FONT]
[FONT=Lucida Grande] Firmware Version: 5.258 (6.1)[/FONT]
[FONT=Lucida Grande] Bluetooth Power: On[/FONT]
[FONT=Lucida Grande] Discoverable: Off[/FONT]
[FONT=Lucida Grande] Connectable: No[/FONT]
[FONT=Lucida Grande] Auto Seek Keyboard: On[/FONT]
[FONT=Lucida Grande] Auto Seek Pointing: On[/FONT]
[FONT=Lucida Grande] Remote wake: On[/FONT]
[FONT=Lucida Grande] Vendor ID: 0x0CF3[/FONT]
[FONT=Lucida Grande] Product ID: 0x3004[/FONT]
[FONT=Lucida Grande] HCI Version: 0x5[/FONT]
[FONT=Lucida Grande] HCI Revision: 0x102[/FONT]
[FONT=Lucida Grande] LMP Version: 0x6[/FONT]
[FONT=Lucida Grande] LMP Subversion: 0x01[/FONT]
[FONT=Lucida Grande] Device Type (Major): Computer[/FONT]
[FONT=Lucida Grande] Device Type (Complete): Mac Portable[/FONT]
[FONT=Lucida Grande] Composite Class Of Device: 0x38010C[/FONT]
[FONT=Lucida Grande] Device Class (Major): 0x01[/FONT]
[FONT=Lucida Grande] Device Class (Minor): 0x03[/FONT]
[FONT=Lucida Grande] Service Class: 0x1C0[/FONT]
The reality is:
My device is not discoverable to others and it cannot find any devices (Magic Mouse for example).
What I tried:
1. Setting the ControllerPowerState manually via:
Code:
sudo defaults write /Library/Preferences/com.apple.Bluetooth ControllerPowerState -int 1
sudo launchctl unload /System/Library/LaunchDaemons/com.apple.blued.plist
sudo launchctl load /System/Library/LaunchDaemons/com.apple.blued.plist
2. RehabMan's IOath3kfrmwr.kext -> no change (though I'm not sure if I did it right, installed it once as kext but also tried it via the clover kext folder)
3. Some general bluetooth fix for 10.9 by Edwin_3930K on insanelymac in this post: http://www.insanelymac.com/forum/topic/289871-bluetooth-stuck-in-on-state-and-not-working/
which also didn't work.
I'm out of options, every other solutions I could find are just other ways of doing one of the above 3 things.
Thanks for your help!