- Joined
- Jun 15, 2012
- Messages
- 13
- Motherboard
- Asrock H77M-ITX || 4530s
- CPU
- Core i3 3225 || Core i3 2.1Ghz
- Graphics
- HD4000 || HD3000
- Mac
- Mobile Phone
I have a 4530s - variant XU015UT#ABA
This has been upgraded with a Crucial M4 128Gb
Used a Unibeat (1.5.3) Lion 10.7.0 to install and was stuck for a long time with Kernel Panics for AppleIntelCPUPowermanagement. Got around that by manually copying FakeSMC.kext, NullCPUPowermanagement, ApplePS2Controller.kext and AppleACPIPS2Nub.kext and then using the chmod and chown commands to set appropriate permissions.
This allowed me to boot the machine for the first time. I then applied combo update 10.7.4 and chose the following options from 5.1b1 probook installer before reboot:
OS X Version
- OSX Lion
* - 10.7.4
* Chimera 1.11.0
* Bluetooth 10.7.4 and below ONLY
* AHCI patch (hadn't seen this issue but wanted to be sure I didn't get stuck with it)
Unfortunately I didn't know you had to manually enable logging in PB installer, so I am not 100% sure those were the options I used, but they are close.
I have a few other issues to work out, but my number one priority right now is a lack of detected audio devices. I have not manually installed a patched AppleHDA or VoodooHDA as I cannot afford to experiment and kill the machine as I am using it for work purposes.
I had understood that audio should work out of the box. Is there a known good patch in multibeast that would get me working? I didn't see an audio option in PB Installer.
Thanks in advance for any assistance.
This has been upgraded with a Crucial M4 128Gb
Used a Unibeat (1.5.3) Lion 10.7.0 to install and was stuck for a long time with Kernel Panics for AppleIntelCPUPowermanagement. Got around that by manually copying FakeSMC.kext, NullCPUPowermanagement, ApplePS2Controller.kext and AppleACPIPS2Nub.kext and then using the chmod and chown commands to set appropriate permissions.
This allowed me to boot the machine for the first time. I then applied combo update 10.7.4 and chose the following options from 5.1b1 probook installer before reboot:
OS X Version
- OSX Lion
* - 10.7.4
* Chimera 1.11.0
* Bluetooth 10.7.4 and below ONLY
* AHCI patch (hadn't seen this issue but wanted to be sure I didn't get stuck with it)
Unfortunately I didn't know you had to manually enable logging in PB installer, so I am not 100% sure those were the options I used, but they are close.
I have a few other issues to work out, but my number one priority right now is a lack of detected audio devices. I have not manually installed a patched AppleHDA or VoodooHDA as I cannot afford to experiment and kill the machine as I am using it for work purposes.
I had understood that audio should work out of the box. Is there a known good patch in multibeast that would get me working? I didn't see an audio option in PB Installer.
Thanks in advance for any assistance.