Hi toleda,
once again it's me - but now with a new mainboard: GIGABYTE Z170X SOC FORCE.
And a new problem with HDMI-Audio for AMD cards. But i think, you just have to point me in the right direction.
Problem - see IORegistryExplorer entry for the cards:
as you can see, they sit under PEG0@1/PEGP@0/pci-bridge@10 and PEG0@1/PEGP@0/pci-bridge@11.
So what do i have to change in the first few lines of your file "SSDT-HDMI-AMD-PEG0.aml":
- - - - -
DefinitionBlock ("", "SSDT", 1, "toleda", "ami789a", 0x00003000)
{
External (_SB_.PCI0.PEG0, DeviceObj) // Warning: Unknown object
External (_SB_.PCI0.PEG0.PEGP._ADR, UnknownObj) // Warning: Unknown object
Scope (\_SB.PCI0.PEG0)
{
- - - - -
my thought was, i have to enter some more information on the two "External..." lines and also then in the "Scope..." line,
but, as i am not a coder, i don't know what i have to enter there, to make it work. What do i have to enter for "pci-bridge@10" ?
For your need, i have attached the IORegEx file, so you can check the whole entry, if you find any time.
Thanx in advance...
Mork vom Ork