Audio - HDMI Audio AppleHDA [Guide]

[toleda]

hdmi audio I still can't enable

Installed 2 HDMI audio methods, guaranteed failure.
Remove config.plist/ACPI/DSDT/Patches/Item 0, 1 and 2.
Restart.
See Problem Reporting, Post #1, reply with new files

 

[rdmitry0911]

Installed 2 HDMI audio methods, guaranteed failure.
Remove config.plist/ACPI/DSDT/Patches/Item 0, 1 and 2.
Restart.
See Problem Reporting, Post #1, reply with new files

OK, I did it. Still no HDMI audio. Just to be sure, I renamed SSDT-HDMI-HD530..aml to SSDT-1.aml in ACPI/patched

 

[toleda]

Still no HDMI audio

Renaming an ssdt does not enable HDMI audio.
Ignored Post #1410. Attach all requested files.

 

[rdmitry0911]

Renaming an ssdt does not enable HDMI audio.
Ignored Post #1410. Attach all requested files.

Sorry that I didn't do that precisely. Here it is:

1. Description of HDMI audio problem: HDMI audio does not work
   
2. OS X version/motherboard model/BIOS version/processor/graphics: 10.11.4/msi z170a-g43 plus/AMI BIOS E7970IMS.300/Core i3 6100/Intel HD530
   
3. Procedure/Guide Used: SSDT/[Guide]_HD5x0-hdmi_audio_(clover_or_ssdt).pdf
   
4. Copy of IORegistryExplorer/IOJones (either): see below
   1. IOReg/File/Save a Copy As…, verify file (no ioreg.txt, screenshots): IORegistryExplorer attached
   2. IOJones/File/Save...: n/a
5. Copy Of Console/All Messages (last boot)
   1. Console/File/Save a Copy As...: attached
6. System/Library/Extensions/AppleHDA.kext: attached
   
7. Chameleon: n/a
   1. Extra/org.chameleon.Boot.plist
   2. DPCIManager/Misc/Boot Log
   3. Extra/dsdt.aml (if installed)
   4. Extra/ssdt.aml
8. Clover: see below
   1. EFI/CLOVER/config.plist: attached
      
   2. EFI/CLOVER/misc/debug.log (Set config.plist/Boot/Debug/YES)
      1. or DPCIManager/Misc/Boot Log: attached
   3. EFI/CLOVER/ACPI/Patched/dsdt.aml (if installed): n/a
      
   4. EFI/CLOVER/ACPI/Patched/ssdt.aml: attached

From Troubleshooting section:

1. HDEF@1F,3, layout-id <00 00 00 00>
   
2. AppleIntelFramebuffer@0, connector-type <01 00 00 00>
3. AppleIntelFramebuffer@1, connector-type <00 04 00 00>
4. AppleIntelFramebuffer@2, connector-type <00 04 00 00>
5. AppleIntelFramebuffer@3, connector-type <00 04 00 00>

Thank you, Dmitry

 

[toleda]

HDMI audio does not work

cloverHDMI does everything in the ssdt guide, see Post #1
Remove:
config.plist/ACPI/DSDT/Patches/Item 2 (Rename HDAS to HDEF)
config.plist/KernelAndKextPatches/KextsToPatch/Item 4 (HD530 Port 6 HDMI fix)
config.plist/KernelAndKextPatches/KextsToPatch/Item 5 (HD530 Port 7 DVI fix)
Restart. Attach new files.

 

[rdmitry0911]

cloverHDMI does everything in the ssdt guide, see Post #1
Remove:
config.plist/ACPI/DSDT/Patches/Item 2 (Rename HDAS to HDEF)
config.plist/KernelAndKextPatches/KextsToPatch/Item 4 (HD530 Port 6 HDMI fix)
config.plist/KernelAndKextPatches/KextsToPatch/Item 5 (HD530 Port 7 DVI fix)
Restart. Attach new files.

OK, Yesterday I updated system to 10.11.5

config.plist/ACPI/DSDT/Patches/Item 2 (Rename HDAS to HDEF): did
config.plist/KernelAndKextPatches/KextsToPatch/Item 4 (HD530 Port 6 HDMI fix): was disabled, now removed completely
config.plist/KernelAndKextPatches/KextsToPatch/Item 5 (HD530 Port 7 DVI fix): was disabled, now removed completely

From Troubleshooting section: still have

1. HDEF@1F,3, layout-id <00 00 00 00>
   
2. AppleIntelFramebuffer@0, connector-type <01 00 00 00>
3. AppleIntelFramebuffer@1, connector-type <00 04 00 00>
4. AppleIntelFramebuffer@2, connector-type <00 04 00 00>
5. AppleIntelFramebuffer@3, connector-type <00 04 00 00>

SSDT are the same, didn't include into archive, new files are attached
Thank you, Dmitry

 

[toleda]

config.plist/KernelAndKextPatches/KextsToPatch/Item 4 (HD530 Port 6 HDMI fix): was disabled, now removed completely
config.plist/KernelAndKextPatches/KextsToPatch/Item 5 (HD530 Port 7 DVI fix): was disabled, now removed completely

Not true in attached config.plist
Attached config.plist is not the config.plist Clover is loading, mount boot EFI partition. Attach new files.

 

[rdmitry0911]

Not true in attached config.plist
Attached config.plist is not the config.plist Clover is loading, mount boot EFI partition. Attach new files.

Hi Toleda, I'm out of home for 10 days at the moment. I'll be back
Thank you

 

[weberio]

Hello, in a Gigabyte H81m-s2h no work HDMI for me

Thank you for the help.

 

[toleda]

no work HDMI for me

See Problem Reporting, Post #1, attach requested files.