- Joined
- Mar 9, 2015
- Messages
- 20
- Motherboard
- X79 Sabertooth/Z390 DESIGNARE
- CPU
- E5‑[email protected]/i9-9900K@5Ghz
- Graphics
- Vega 56/5700 Xt
- Mac
This board had zero working usb ports and I hit the prohibited sign during install. I ended up loading the installer on an ssd and buying a PCI USB card referenced in other threads to get it going with a keyboard. I used the standard config.plist for my 970 GTX. SM Bios 5,1. I am using NV_drv=1 to get the web drivers to work, otherwise it defaults back to OS X on reboot.
Boot flags for install:
-V, cpus=1, dart=0, nv_disable=1, rootless=0
Post install after loading web drivers:
dart=0, NV_drv=1, kext_devmode=1, rootless=0
Today I found an edited dsdt for my board somewhere on the internet. After loading that in ACPI/patched and checking Drop OEM_DSM I have working USB2.
Last thing to figure out is getting the HW sensors up.
Also noticed that socket 2011 is gone from the buyers advice, is this due to the USB issues with El Cap, X99 replacing soon?
Boot flags for install:
-V, cpus=1, dart=0, nv_disable=1, rootless=0
Post install after loading web drivers:
dart=0, NV_drv=1, kext_devmode=1, rootless=0
Today I found an edited dsdt for my board somewhere on the internet. After loading that in ACPI/patched and checking Drop OEM_DSM I have working USB2.
Last thing to figure out is getting the HW sensors up.
Also noticed that socket 2011 is gone from the buyers advice, is this due to the USB issues with El Cap, X99 replacing soon?