Contribute
Register

ASUS Transformer Book Flip?

Status
Not open for further replies.
I chose the 4000 as that was as close to 4400. I couldn't find the 4400 one from the link you sent me. Perhaps I missed it?
 
I chose the 4000 as that was as close to 4400. I couldn't find the 4400 one from the link you sent me. Perhaps I missed it?

You missed it. Look carefully at the list... There is only one with 4400 in the name.
 
Yep, I just found it. The graphics now work like a charm. Did that IOreg tell you what my sound card was, by any chance? I found the kexts for several ones with the Realtek cards, but I don't know which one it is.
 
Yep, I just found it. The graphics now work like a charm. Did that IOreg tell you what my sound card was, by any chance? I found the kexts for several ones with the Realtek cards, but I don't know which one it is.

You need to obtain an audio codec dump from Linux.
 
Just found it: ALC233. I tried using this link and downloaded the codec: http://www.insanelymac.com/forum/topic/298663-applehda-for-yosemite/

I checked that the flags in Clover were "kext-dev-mode=1" and replaced the AppleHDA. Also, I added it in the S/L/E and the EFI/CLOVER/KEXTS/10.10 and Other folder. I'm still not getting any sound.

?
 
Just found it: ALC233. I tried using this link and downloaded the codec: http://www.insanelymac.com/forum/topic/298663-applehda-for-yosemite/

I checked that the flags in Clover were "kext-dev-mode=1" and replaced the AppleHDA. Also, I added it in the S/L/E and the EFI/CLOVER/KEXTS/10.10 and Other folder. I'm still not getting any sound.

?

You need to do the required DSDT patches. It is covered in the guide: http://www.tonymacx86.com/yosemite-laptop-support/152573-guide-patching-laptop-dsdt-ssdts.html

Also, you'll probably need CodecCommander: https://github.com/RehabMan/EAPD-Codec-Commander
 
Is there a way to enable it through Clover? I noticed this in the config.plist:
image.jpg
My apologies for the double upload on the image.
 

Attachments

  • image.jpg
    image.jpg
    670.1 KB · Views: 115
Is there a way to enable it through Clover? I noticed this in the config.plist:
...
My apologies for the double upload on the image.

Not recommended. You'll need to patch DSDT for a variety of other reasons anyway.
 
Ok, what do I add to the DSDT to make it work? I looked on the site, but nothing useful came up; it just told me 'DSDT/HDEF/Layout-ID'

Also, are there any USB WiFi sticks you would recommend for this laptop? I found a few, but they're for Windows only. I don't want to get another WiFi card as that'll be hard for me to install.
 
Ok, what do I add to the DSDT to make it work? I looked on the site, but nothing useful came up; it just told me 'DSDT/HDEF/Layout-ID'

Did you read the Audio section of ACPI patching guide?

http://www.tonymacx86.com/yosemite-laptop-support/152573-guide-patching-laptop-dsdt-ssdts.html

Also, are there any USB WiFi sticks you would recommend for this laptop? I found a few, but they're for Windows only. I don't want to get another WiFi card as that'll be hard for me to install.

I would not recommend USB WiFi...

Install a compatible PCIe WiFi card instead.
 
Status
Not open for further replies.
Back
Top