- Joined
- Jul 21, 2014
- Messages
- 19
- Motherboard
- Gigabyte GA-Z97X-UD3H-BK
- CPU
- Intel Core i7 4790K @4Ghz
- Graphics
- Geforce GTX 970 G1 Gaming
- Mac
- Classic Mac
- Mobile Phone
Hey guys,
I'm trying to hackintosh my Asus N76VB-T4038H.
Specs:
CPU: Intel Core i7-3630QM
RAM: 8GB DDR3
Chipset: Intel Mobile HM76
GPU: Intel HD4000 and GeForce GT740M
Screen Resolution: 1920x1080
Ethernet: Qualcomm Atheros AR8161
WiFi: Qualcomm Atheros AR9485WB-EG
I'll attach a full spec file, i know i actually have to add my specs to my profile, but i already have my desktop there.
After a lot of effort, i found a way to install the OS. Only having USB 3.0 was a big challenge. I installed Yosemite because El Capitan requires UniBeast 6, which uses clover, and i can't get clover to boot, i assume that's because of USB 3, It comes up with boot1 Error /boot 5. So i used UniBeast 5 with Yosemite to get that installed. After That fully works, i'll upgrade it to El Capitan in some way.
I used this guide to make the installer USB: http://www.tonymacx86.com/yosemite-...-booting-os-x-installer-laptops-unibeast.html
After installation, i can boot without any flags, but my internal display does not work, it starts black, then the edges light up and slowly go to the center in a grey color. When i plug a HDMI monitor in, that monitor works with full acceleration. Ethernet works, sound doesn't, the touchpad works but without gestures, and i'm yet to find out what else needs fixing.
The monitor problem is my largest one right now. I'm stuck
What can i do to get it working? Thanks in advanceView attachment N76VB-T4038H.txt
I'm trying to hackintosh my Asus N76VB-T4038H.
Specs:
CPU: Intel Core i7-3630QM
RAM: 8GB DDR3
Chipset: Intel Mobile HM76
GPU: Intel HD4000 and GeForce GT740M
Screen Resolution: 1920x1080
Ethernet: Qualcomm Atheros AR8161
WiFi: Qualcomm Atheros AR9485WB-EG
I'll attach a full spec file, i know i actually have to add my specs to my profile, but i already have my desktop there.
After a lot of effort, i found a way to install the OS. Only having USB 3.0 was a big challenge. I installed Yosemite because El Capitan requires UniBeast 6, which uses clover, and i can't get clover to boot, i assume that's because of USB 3, It comes up with boot1 Error /boot 5. So i used UniBeast 5 with Yosemite to get that installed. After That fully works, i'll upgrade it to El Capitan in some way.
I used this guide to make the installer USB: http://www.tonymacx86.com/yosemite-...-booting-os-x-installer-laptops-unibeast.html
After installation, i can boot without any flags, but my internal display does not work, it starts black, then the edges light up and slowly go to the center in a grey color. When i plug a HDMI monitor in, that monitor works with full acceleration. Ethernet works, sound doesn't, the touchpad works but without gestures, and i'm yet to find out what else needs fixing.
The monitor problem is my largest one right now. I'm stuck
What can i do to get it working? Thanks in advanceView attachment N76VB-T4038H.txt