- Joined
- Jul 20, 2019
- Messages
- 20
- Motherboard
- Asrock Z390 Phantom ITX
- CPU
- I5-9600k
- Graphics
- Sapphire RX 580
Hey guys and girls,
just trying at least for 4 days to build an hackingtosh. Used many guides, patches and so on, with random freezes, crashes and stops.
My configuration
Mainboard Asrock z390 phantom gaming-itx with BIOS 1.6 (Tried also 1.2) (Also tried the Asrock Patch)
Bios Settings where taken from this thread
CPU Intel i5-9600k
Ram 32GB Crucial Ballistix Sport LT 3000
Graphics Radeon RX580 Sapphire 8GB
Wifi Modul BCM94360CS2
Power supply bequiet 500W
Corsair NVME MP510 Force 500Gb (Tried also with sata Crucial MX300 500GB)
USB Stick Sandisk USB 3.0 32GB tried installation from USB 3.0 I/O port and Frontpanel USB 2.0
MacBook pro 13.3" for preparing usb Stick
Mac OS Mojave 10.14.6 so i tried it with the news version.
I installed to a second nvme Windows 10, where everything works like charm. Memtest was also done, so i think the hardware is okay.
I need your help, sorry to tell this but after 4 days of trying i could even start into macOS.
So with your help, i would like to go step by step. Im ready and will post after a step my results here if its okay : )
just trying at least for 4 days to build an hackingtosh. Used many guides, patches and so on, with random freezes, crashes and stops.
My configuration
Mainboard Asrock z390 phantom gaming-itx with BIOS 1.6 (Tried also 1.2) (Also tried the Asrock Patch)
Bios Settings where taken from this thread
[Success] ASRock Z390 Phantom Gaming-ITX + TB3 + iGPU + Mojave + SFF Build
rj510's Build: ASRock Z390 Phantom Gaming-ITX + TB3 + iGPU with Mojave Components ASRock Z390 Phantom Gaming-ITX/ac https://www.amazon.com/dp/B07HYNL939/?tag=tonymacx86com-20 https://www.newegg.com/p/N82E16813157854 G.SKILL TridentZ RGB Series 32GB (2 x 16GB) DDR4 SDRAM 4000, Model...
www.tonymacx86.com
Ram 32GB Crucial Ballistix Sport LT 3000
Graphics Radeon RX580 Sapphire 8GB
Wifi Modul BCM94360CS2
Power supply bequiet 500W
Corsair NVME MP510 Force 500Gb (Tried also with sata Crucial MX300 500GB)
USB Stick Sandisk USB 3.0 32GB tried installation from USB 3.0 I/O port and Frontpanel USB 2.0
MacBook pro 13.3" for preparing usb Stick
Mac OS Mojave 10.14.6 so i tried it with the news version.
I installed to a second nvme Windows 10, where everything works like charm. Memtest was also done, so i think the hardware is okay.
I need your help, sorry to tell this but after 4 days of trying i could even start into macOS.
So with your help, i would like to go step by step. Im ready and will post after a step my results here if its okay : )