- Joined
- Mar 29, 2019
- Messages
- 226
- Motherboard
- Zbook G4 17
- CPU
- i7-7820HQ
- Graphics
- HD630+WX4150
- Mac
- Classic Mac
- Mobile Phone
For PM you should see something along the lines of:
Mine not PR, as they are CPU
For PM you should see something along the lines of:
Done some battery only tests so list of FB, which can work without power cord on low frequency (Core 214 mhz, 15W):
Salado (non listed in info.plist, but in 9500 controller)
Exmore not stable, long switch to power save mode, gpu eats all power, than freeze, than low power mode enabled (non listed in info.plist, but in 9500 controller)
Anyway, non one of them return high profile powerstate after power connector was connected
That looks correct now, the IOreg version you uploaded before didn't have the X86PlatformPlugin enabled.Mine not PR, as they are CPU
View attachment 516439
Nope, i am on High Sierra, was planning to change GTX1060 to RX580 for eGPU but stuck on problem, when external gpu send video signal back to internal gpu via pci. And at that point i have Kernel panic, or artifacts (Have you tested Catalina or Big Sur?
On Battery only I get terrible throttling in Mac (Both CPU and GPU) but there's almost no information on how to change that.Done some battery only tests so list of FB, which can work without power cord on low frequency (Core 214 mhz, 15W):
Its not trotling, its power saving. Windows have option "High perfomance profile" and running cpu on 3.2 ghz, while macos have same power saving mode as in windows and mine cpu will run on 2.7 Ghz. mine zbook g3 eats about 170wats on full load on a\cI get terrible throttling in Mac
Palena (5) @ 0x66e80
LVDS, DP, DP, DP, DP
020000000001000039050108000000002001010100000000
000400000001000000010243300000001000020200000000
000400000001000000010313200000002103030300000000
000400000001000000010453500000001102040400000000
000400000001000000010533400000001204050500000000
Palena (5) @ 0x66e80
LVDS, DP, DP, DP, DP
020000000001000039050408000000001102040400000000
000400000406000000010243300000001000020200000000
000400000403000000010313200000002103030300000000
000400000403000000010153500000002001010100000000
000000000000000000000000000000000000000000000000
okay, i will try!Trust me, try the kext I attached above that injects Acre's PowerPlay tables, and then just patch your connectors like I posted before, using the default framebuffer.
It beats Palena by more than 15fps on cinebench and clocks down just the same. And after 2 days of heavy testing trying to crash it, It's solid.
Directly in config.plist->Deviceshow did you patch connectors? (i mean where? clover kext patch, dsdt?)