- Joined
- Jun 13, 2015
- Messages
- 11
- Motherboard
- HP ProBook 4440s-Clover
- CPU
- i7-3610QM
- Graphics
- HD 4000, 1366x768
- Mac
Hiya,
Hoping you can help.
Been using the Wifi on my HP ProBook 4440s for over a year now but it seems to have died on me.
It is unable to find any network and only tries to search for a split second. The logo is greyed out as if I'm not close enough to a network for it to find.
The network itself is fine, I'm using the wifi on other devices; I'm currently using the ProBook through an Ethernet ok and I have not updated my OS since I got it working over a year ago. I should also note that no updates or files were installed near or at the time of this issue occuring.
Having not done this for a while I'm pretty rusty.. not sure which steps to take to avoid fresh installs etc if it's a small fix.
Sys Info: Clover System running 10.10.3
Wifi Sys Report:
Software Versions:
CoreWLAN: 5.0 (500.35.2)
CoreWLANKit: 4.3 (430.38.1)
Menu Extra: 10.3 (1030.34)
System Information: 9.0 (900.9)
IO80211 Family: 7.3 (730.60)
Diagnostics: 4.2 (420.71)
AirPort Utility: 6.3.5 (635.2)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x1461)
Firmware Version: Atheros 9285: 4.0.74.0-P2P
MAC Address: 2c:81:58:ff:41:77
Locale: APAC
Country Code:
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
Wake On Wireless: Supported
AirDrop: Supported
Status: Off
Thank you.
Hoping you can help.
Been using the Wifi on my HP ProBook 4440s for over a year now but it seems to have died on me.
It is unable to find any network and only tries to search for a split second. The logo is greyed out as if I'm not close enough to a network for it to find.
The network itself is fine, I'm using the wifi on other devices; I'm currently using the ProBook through an Ethernet ok and I have not updated my OS since I got it working over a year ago. I should also note that no updates or files were installed near or at the time of this issue occuring.
Having not done this for a while I'm pretty rusty.. not sure which steps to take to avoid fresh installs etc if it's a small fix.
Sys Info: Clover System running 10.10.3
Wifi Sys Report:
Software Versions:
CoreWLAN: 5.0 (500.35.2)
CoreWLANKit: 4.3 (430.38.1)
Menu Extra: 10.3 (1030.34)
System Information: 9.0 (900.9)
IO80211 Family: 7.3 (730.60)
Diagnostics: 4.2 (420.71)
AirPort Utility: 6.3.5 (635.2)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x1461)
Firmware Version: Atheros 9285: 4.0.74.0-P2P
MAC Address: 2c:81:58:ff:41:77
Locale: APAC
Country Code:
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
Wake On Wireless: Supported
AirDrop: Supported
Status: Off
Thank you.