9600GT Problem

[Jithin.C.V]

Again, the same situation.
Just to be clear - I didn't have to change anything else in clover configuration?
(I am just checking the boxes in clover configurator)

Now you are only facing problem with Graphics. right?

NVIDIA Injection is enabled in your config.plist, so that is fine.

Have you tried to boot with PCIRootUID=1 ??

 

[oliwer138]

That is right, everything is working perfectly except graphics. PCIRootUID=1 and PCIRootUID=0 bootflags were used by me, they gave the same result - maze and fan off

 

[oliwer138]

Mistake: The fan is just slowing down, I thought it turns off because I didnt hear it Anyway everything results in:

Graphics Card have two DVI outputs, one DisplayPort and HDMI, currently I am only able to check DVI's though..

 

[oliwer138]

To make everything clear here are my bios settings:

 

[oliwer138]

Thank you for reply
Result is nvenabler probe fails, CST evaluation failed. After those lines my favourite pixel maze bumps up

 

[oliwer138]

I think I know what is going on!
Its either fault of my power supply or motherboard.
When I connected 9600GT to the second computer Yosemite installation from USB started perfectly with no graphical issues!
Computer I have problems with has 350Watts power supply.. Do you think that could be the problem? Or maybe its some sort of motherboard compatibility failure with that Graphic Card?

Sorry I've wasted your time, I have my lesson..

Thank you!

 

[oliwer138]

Looks like there is some sort of problem between my motherboard and graphics card.. I changed power supply to 500W and the problem still exists Beginning to lose hope now

 

[Jithin.C.V]

Have you deleted any kext which is related to NVIDIA??

Have you tried with the linked kext on post#25 ??

 

[oliwer138]

No, I am currently using clean yosemite install (installed on 9200 le - maybe this is problem?) tried both nvenabler (maybe I should look for 1GB version of this kext?) and natit. Thanks

 

[Jithin.C.V]

No, I am currently using clean yosemite install (installed on 9200 le - maybe this is problem?) tried both nvenabler (maybe I should look for 1GB version of this kext?) and natit. Thanks

While trying to install the OS X with this card, what is happening?