eelhead
Super Moderator
- Joined
- Mar 1, 2011
- Messages
- 3,088
- Motherboard
- GA-Z170X-Designare
- CPU
- i5 7600k
- Graphics
- GTX 1070
- Mac
- Classic Mac
- Mobile Phone
Well I really f'ed it up now. Was messing with it some more late last night and replaced some ATI kext and now I cant even boot back into it. It gets stuck at gray Apple load screen with the spinning wheel. Tried all modes to get into it but still nothing.
Says it couldn't load com.apple.driver.appleRTC
Says Mach-0 file is malformed: invalid magic number: Oxbebafeca
Tried to just start over with fresh instal and got this error now,
Memory allocation error: addr=0x0, size=0x8002770, file=device_inject.c, line=246
This is a nonrecoverable error! System halted!
Don't know what any of that is but I was going to post in In insulation support with both. Dont know how to start from scratch if I keep getting that error. I was at 4gb of ram as well, same stick I used to do first instal because it's under the CPU cooler.
Says it couldn't load com.apple.driver.appleRTC
Says Mach-0 file is malformed: invalid magic number: Oxbebafeca
Tried to just start over with fresh instal and got this error now,
Memory allocation error: addr=0x0, size=0x8002770, file=device_inject.c, line=246
This is a nonrecoverable error! System halted!
Don't know what any of that is but I was going to post in In insulation support with both. Dont know how to start from scratch if I keep getting that error. I was at 4gb of ram as well, same stick I used to do first instal because it's under the CPU cooler.