Search results

I can confirm that the latest version of Stable Diffusion UI with Autmatic111 is fully functional on my Hackintosh. It takes 15-20 seconds for 20-30 steps with 512x512 Images. https://github.com/AUTOMATIC1111/stable-diffusion-webui My Hackintosh is AsRock z490 itx + Intel core i9 + AMD 6900XT

Couple of reboots and about an hour but otherwise painless with OC 74.

Easy and painless upgrade. Magically "Unlock with Apple watch" is working so much more reliably now.

Wondering if this is still relevant or needed for Big Sur?

Wondering if anyone has migrated this hardware combination onto OpenCore?

Is there a way to change the fans that iStat sees? In my case the AsRock Z390I motherboard has 1 CPU fan and 2 Aux fans but istat shows only one fan because the SMBIOS is iMac 19,1. HWMonitorSM2 sees all three fans and then some.

Thanks for replying. I'm guessing it's something to do with adapters. For me with BusId 5 and Pipe 18 DisplayPort cable works fine but Displayport to DVI cable doesn't. I noticed you're using a Displayport to HDMI adapter. Your build look nice and you should post it in completed builds!

Hey checotrevi I have the same exact hardware for the current rig. I did use the defaults from below and all three ports seem to be somewhat working. They're finicky when I used HDMI->DVI, DP->HDMI or DP->DVI cable...

Don't think this Motherboard has a built in WiFI/BT capability. Also it's available on Amazon now https://www.amazon.com/dp/B07HM6ZC9D/?tag=tonymacx86com-20

So late in replying but if it still helps someone... I just got back to this system and yes I did figure out the NVRAM. I was originally using Emulated NVRAM with EmuVariableUefi.efi UEFI driver. Now I just enabled native NVRAM by: * Removing EmuVariableUefi.efi from drivers/UEFI * compiling...

Thanks @NZRichard I completely agree with you on this. I went through similar process for various builds and selected a 650w/750w 80+ Corsair and an EVGA and I monitor the actual usage as well. Will update my previous message to ensure the 450w comment isn't mis-understood

Hey @dlgoodchild I have nearly identical hardware and here's my recommendation: 1. This mobo has a wifi and a non-wifi version, any preference of one over the other? A. Built-in WiFi doesn't work on Mac so might as well go for non-WiFi version if you can save $$s 2. Does the S1200A audio...

Hey @jbarnette Have a you updated to Catalina 10.15.4 yet?

Just upgraded from 10.15.3 -> 10.15.4 and the it failed the first time. I updated all kexts/clover and it worked. Now Preboot and install volumes are still there and show up in clover. Is there a way to clean up those?

Curious, what frequency have you set to your RAM to?

Yeah an Apple dongle to a USB3.0 type A drive. Here's a pic so there's no confusion

I currently don't have any Thunderbolt devices to test. So I connected USB 3.0 drive to Apple Hub to Thunderbolt port and the USB showed up.

Thanks again! It indeed was USB-C devices blocked on Thunderbolt ports. I was able to test a USB 3 drive connected to Apple USB-C hub. The LG 4K USB-C monitor doesn't work with the cable it came with. Will update more once I test a real thunderbolt device.

Yeah It's set to No Security.

Thank you again @CaseySJ This is such a busy thread and you take time to reply to everyone. Follow up question: So yeah I did follow the mini guide and everything looks good including the PCI page BUT anything connected to either Thuderbolt ports doesn't show up at all. I've tried a LG USB-C...