Hi all, can I completely disable power of a specific USB port (only one though) during sleep? I use USBPorts.kext injection (Hackintool generated) with SSDT-EC.aml and SSDT-USBX.aml. Maybe the power values in SSDT-USBX.aml - kUSBSleepPortCurrentLimit and kUSBSleepPowerSupply - could be set to 0...
Update: I flashed the F11 BIOS and evrything works again. Thunderbolt settings reappeared in the BIOS (without the enumeration mode sub-menu). The card is recognized via the pre-edited SSDT in Post 1 even if no devices are attached when the computer is powered on. This looks like this:
After...
I tried the enumeration settings without reading the earlier posts first (am on an Apline Ridge v2)... now I cannot change any TB settings in the BIOS anymore. Could not make any further tests if the card works or not.
Has anyone ever recovered the TB card / the BIOS settings after having...
When I switch to IMacpro1,1 SMBIOS on 10.14.5 b2, my USB Inject kext stops working - I have only USB2 ports. Switched back to IMac18,3 and same kext works again. Is this a known issue? Do I need another SSDT or something like this for IMacpro1,1?
That is the point - pixel density. I tried a DELL 24" 4k, but (besides a sleep/wake issue with the device), the pixel density is not fine enough: native scaling results in too big fonts; software scaling looks not great either.
I do not see any real alternatives for 5k with a 5120 x 2880...
I am wondering if it is worth the hassle to buy a LG 5K or 4K and configure a Gigabyte Alpine Ridge (or Titan Ridge) Card (hotplug / sleep issues). The price is relatively high and I would normally prefer an Eizo with integrated color management, but fonts look pretty ugly on non-retina. Not...
Hello,
I upgraded from 10.14.3 to 10.14.4 and the Patch described here (fix given by sunki from InsanelyMac) to enable SATA Hotplug stopped working: https://www.tonymacx86.com/threads/high-sierra-hdds-are-no-hot-plug-capable-anymore.238610/post-1668828
Anyone having a workaround?
I created a USBPorts.kext with an older elease and removed USBInjectAll. Still the same issue. Any other ideas? I attach a new debug file.
Is there any advantage in using the SSDT method against the Injector Kext method? Have not tried it yet after Kackintoll has been updated to work again.
The Hackintool does not read any values on my machine. Is there an issue with 10.14.3? The latest posts here indicate simialr problems: https://www.tonymacx86.com/threads/release-hackintool-v1-8-3.254559/post-1909730
Thanks, I will try to create a specific USB injector Kext with this tool. I was not aware of the tool. I did make the port discovery test, but kept USB Inject All with a long exclusion list as boot parameter (mainly because without knowledge of this tool, the next steps according to RehabMan's...
Hello,
I recently noticed random wake-ups (but going back to sleep immediately) during the night and disabled proximitywake, but no success. Any other ideas? I use darkwake=10 kernel parameter to have usb keyboard wakeup with a single key stroke (otherwise, I need to press a button several...
By way of update, the ball baering of the fans were damaged. After replacement, no noticeable noice by the fans anymore under normal conditions (i.e. no GPU calculation):
Hello,
I have a question to those driving the display with a RX580: What is the average temperature of the card? Is the fan still off for longer periods? I noticed that when I connect two 1080p displays to the RX580, the fan goes on more often than when connecting only 1 display.
And another...
Hi all,
I recently build a new rig and made it a Hackintosh. I had extreme coil whine at the beginning when the RX580 was under load and whenever there was Ethernet traffic. It turned out to be the PSU. I changed from a CoolerMaster MasterWatt 650 to a BeQuiet Dark Power Pro 11, that made the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.