Search results

It bumped it to 2868 (single core), and 17361 (multicore). Unbelievable. Why would anyone ever use macpro7,1 then? To get the cool "about my mac" picture?

will try that out

After trying the official Opencore guides (fail), and trying the EFI folders of people with similar (but different) builds (think Z690 instead of z790, or 12400 instead of 13700k, or UD AC instead of UD AX etc), which also failed, it finally worked with this...

Ive searched here for the exact same build, but can only find SIMILAR motherboard builds saying "success". Which build is most similar? One with a Gigabyte Z790 UD AC (notice the AC rather than AX) or one with a Gigabyte Z690 UD AX (notice the 690 rather than z790) Or should I spend 20 hours...

Aany update? I just ordered the exact same mobo, but with a 13700k instead

Just realized it also stopped showing my windows drive as a boot option too.

I had clover working with an internal NVME and an external USB SSD both running Catalina. I installed open core and updated the NVME install to Big Sur. It worked, but now my external SSD with Catalina doesnt show up as a boot option (but it is visible in finder and disk utility when I boot into...

Intel has gone down the shitter hard and quick the past 5 years, but at least they are now very diverse and progressive! https://www.intel.com/content/www/us/en/diversity/diversity-2015-annual-progress-report.html

I bought a WD Blue NVME (the bersion that does 2000 speed, not 500), and everything seems to work now.

I dont use onboard graphics, but for the ethernet issue, assuming you are using the lucy kext, the kext doenst work on its own. You have to go to network / advanced/ hardware, and change it to "custom" and choose "1000tbase" or whatever the 1000 option is, and save.

Same issue. I have tried different motherboards, different cpus, different RAM, different SATA cables, clean reinstalled like 5 times, tried clover and open core, tried Mojave and Catalina, SSDs and NVME, and same MFing problem. The read speed is fine, but the write speed STARTS good for a few...

Me too. I have 2 Sandisk plus 240gb drives, and one drops as low as 3MB/s write and the other drops to 30MB/s write in AJA. They score 400-500 in windows.

My OS was already installed before using open core. I already had a working clover config, and updated my mobo and CPU because clover wasn’t working.

I have a similar board, but the z490 version (msi z490-a pro) with a 10700k. I can boot after tweking many of the open core config settings (virtual map true false, etc until it boots), but it is very laggy once booted (finder takes like 2 minutes to open when I first load). Could this patch...

Here is my EFI. I removed the MBL, serial, and UUID.

Update: I thought my hack was working fine now after redoing the open core from the website instructions, but there is still some slight jittering / lag in performance. When I boot, it lists a few errors and then boots in successfully, and I wonder if those errors are related. Is there no way to...

I had 2 issues. First, the “no Ethernet is connected” issue I mentioned. Second, the computer stuttered and lagged every 5 seconds or so, and scored abysmally in geekbench. I ended up making my own open core efi using the instructions in the open core site, and that stopped the stutters. Then...

I guess I didn’t clarify. I upgraded the CPU and the motherboard (it came yesterday), and the answer is that clover apparently doesn’t work with comet lake, and I had to use an open core efi to boot. It was very laggy and stuttery (dragging windows and scrolling through browsers etc stuttered...

I’m using an msi z490-a Pro with 10700k. Clover is not working at all, but using an open core efi folder from someone is working. Now I am trying to get lucy kext to work. It loads the Ethernet device in “network”, but says “no Ethernet cable is plugged in” even though it works in windows. Will...

Do I need to make any changes, or will it just work?