Search results

@ Kaustic Thanks for sharing! I just updated my guide to include a sound app that should make your sound work 100%. It's under step 8.

Question for you all? I set up a second monitor using DVI-D and everything works great unless I turn off my computer. When I turn it back on it goes into a boot loop. As soon as I unplug the DVI Cable it boots just fine. Any advice?

@ Jesso This board does not come with bluetooth or wifi. @Hightide25 Boot using -v and let us know what boot errors you are getting.

This is the best Audio App I have found. Regarding Audio: I found this app more reliable than shilohs. You can set it to open automatically at login and to run on wake from sleep. It also stores your password so you don't have to put it in manually every time...

@ Klaner I would try a different USB Flash drive and make sure it's plugged into the USB 2.0 port on the motherboard (not on the computer case). I used a Sandisk 16 gb 3.0. Don't know if that will make a difference. It could also be a ram issue. What is your ram rated at? Mine is rated...

@ Klaner How do you have your monitor, keyboard, and mouse hooked up? Also did you re-flash your bios to f4? Also, did you check to see if your PSU is hasswell compatible? It sounds like when you initially tried to install with graphics card plugged in it messed something up on your...

Mine did the exact same thing. Make sure you install the USB 3.0 Universal from Multibeast with nothing but your keyboard plugged in. After your done, reset your comp and see if that fixed it. If that doesn't fix it you may have to delete the Generic USB that you installed.

try this flag: GraphicsEnabler=Yes -f -x maxmem=4096. It could also be the ram your using. Hard to say.

Sounds like a problem with your graphic card/mobo combination. I would flash your motherboard to f4 and try it again with one stick of ram and without your graphics card. Make sure nothing is connected to your computer. How is your monitor hooked up and what type of keyboard/mouse are you...

@ Chris Need more specifics. You mentioned you had a "similar build". What do you have that's different so we can asses the problem. I would reset the bios to it's factory settings and make sure everything is set up according to this guide assuming you have the same motherboard.

Question for you all? Is VGA supported in Yosemite for running a dual monitor? I am looking to run dual monitors. I got a free monitor from work but it only has a VGA connection. My motherboard has VGA and DVI-D. I heard rumors that VGA wont work with Yosemite. Let me know if you have had...

Stork's Entry Level Hector Build: GA-H97N-WIFI - i5-4690 - HD4600 Two Monitors MenuBar App "Reset AppleHDA" by Michael Clifford See post 12

Stork's Entry Level Hector Build: GA-H97N-WIFI - i5-4690 - HD4600 Two Monitors Regarding Audio: I found this app more reliable than shilohs. You can set it to open automatically at login and to run on wake from sleep. It also stores your password so you don't have to put it in manually every...

I don't have that problem on mine. Does it go away after a few seconds? How is your monitor hooked, hdmi etc? Try turning your monitor off and then turn it back on to see if that fixes it.

[SUCESS] Yosemite 10.10.1 / GA-Z97MX-GAMING 5 / Intel I5-4690K / Integrated HD4600, Runs Flawless! Thanks Stork!. Sound is now working 100%. Step 8 on the guide has been updated.

[SUCESS] Yosemite 10.10.1 / GA-Z97MX-GAMING 5 / Intel I5-4690K / Integrated HD4600, Runs Flawless! Update: Sound does not work after sleep. If anyone has a fix that would be very helpful. Thanks.

[SUCESS] Yosemite 10.10.1 / GA-Z97MX-GAMING 5 / Intel I5-4690K / Integrated HD4600, Runs Flawless! Ill check when I get home from work. I never put my comp to sleep. If sound doesn't work I would just get one of these unless there is an easy fix...

Try this guide. Make sure you remove your graphics card during installation, only use one sick of ram, and ENABLE onboard graphics. http://www.tonymacx86.com/user-builds/153315-sucess-yosemite-10-10-1-ga-z97mx-gaming-5-intel-i5-4690k-integrated-hd4600-runs-flawless.html

I have the setup and mine works great. Here is my guide http://www.tonymacx86.com/user-builds/153315-sucess-yosemite-10-10-1-ga-z97mx-gaming-5-intel-i5-4690k-integrated-hd4600-runs-flawless.html

This guide will work great if you decide to take the unibeast/multibeast route http://www.tonymacx86.com/user-builds/153315-sucess-yosemite-10-10-1-ga-z97mx-gaming-5-intel-i5-4690k-integrated-hd4600-runs-flawless.html