Hi Guys
I am building a test Hackintosh and did the setup using unibeast like described
I am using the following
intel DQ77CP MB
i5 3470
4GB
Using intel graphics not Nvidia or ATI
But i get stuck on the IOBluetoothHCIController -- Complete part
I have tried...
Thanks for pointing that out... i was testing a multibeast update and found that installing the multibeast when i attempted the UniBeast method which worked beautifully and booted fine using the flash as a boot source then i ran multibeast just to see how it would respond and mind me without...
i have done this several times... what you need to do is to install MAC OSX first and then windows
first you need to start the mac install and when installing the macosx create the mac partition but leave the remainder raw as you will format can create this when you install you windows... so...
Hi all
I have been playing around with the install of the Hackintosh with my system for some time now and i have gotten it to work fine and i of course have broken it several times.
The tonymac install method has made the setup of lion so straight forward that it leaves little room to...
when you install up to 10.6.7 try using the multibeast 3.7.2 Chimera and not the 3.8 as this caused issue with me...
other than that ensure that you have the 64 bit boot and 3.1 mac pro as your definition. and when you create the partition open it in mac and see whether it has boot contents it...
dont know if this helps but use the chimera that came with the multibeast 3.7.2 and when you upgrade to lion and this allows you to boot into the installer partition dont run the multibeast 3.8 as i found this was the cause of my many failed installations... just boot with the 3.7.2 chimera that...
The PCI fix thing never worked on my system
It caused the same error to appear... but i succeeded...
viewtopic.php?f=169&t=26652
here is my post with my success story although it is a mystery
So i thought i should just share my success story with regards to lion since i failed at least 7 times before i had a mystery success
Well the thing is i installed lion via upgrade which worked like a charm by following the Xmove method provided my tony and the team.
after my install i found...
Hi guys
dont miss read this article... by not means am i unable to install lion. in fact i have re-installed it 6 times over with no issues.
then what is my issue you would think. well the thing is that all though the install installs fine and i boot perfectly i noticed that the two crucial...
Technically once you have created the installer partition for lion from a snow leopard install as explained in the Xmove article on the tonymac forums and then used multibeast to install latest chimera as your boot partition you should be able to install a fresh copy of lion by formating the...
I installed Lion perfectly fine from 10.6.7 but noticed my graphics and audio were not working... i then ran the multibeast as per the norm but only after running multibeast 3.8 i get that PCI configuration error where it freezes during the boot.
Can you tell me why this error occurs and what...
Hi there i tried the Whole Update twice from 10.6.2 and both times it failed to boot... it boots but then gets to the blue screen just before it is supposed to go in and just hangs...
will try again and keep you updated.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.