Search results

I went from 14.1.1 to 14.1.2, NOT 14.2, which this video refers to.

I tried to update my 8300 SFF w/ i7-3770K to 14.1.2 and installation went through fine, but now unable to boot up, Here is the video of the error and attached is my EFI..

UDB, Here is what I find in Dortina's GPU guideline. My config has ig-platform-id is set as 0300923E. Am I missing something? Regarding USB mapping, this is exactly what I've done..

UDB, FT, Rebuilt the USBPorts. I couldn't identify the USB3.1 or USB-C ports, as I don't have any of those storage devices. Attached are my EFI, Screenshots booting to BigSur. I see many error regarding ACPI errors, unable to initialize PXSX, _INJ; Error in Lili, VirtualSMC etc. Here is the...

Oopsie.. I meant to say amls, not kexts. The BigSur was installed with SSDT-GPRW.aml and SSDT-PR00.aml. Now I'm using SSDT-EC-USBX-DESKTOP.aml, SSDT-PMC.aml, SSDT-AWAC.aml and SSDT-PLUG-DRTNIA.aml - based on OC documentation. My board user Killer Ethernet E2500 and thats Atheros. Including...

Big Sur was installed using a different (may be custom) set of kexts and after that, I've cleaned up to use standard kexts and using the current EFI to install. Could that be the reason for duplicate RP05.PXSX?

Attached my current EFI. You can view the video in slower speed by changing the "Play back Speed" of the video under video "Setting" Installer is from macOS "Software Update" Installer is 12.95G in size.

and it fails with KP and here is the URL I'm also attaching few screenshots from the video if it helps..

Disabled the USBMap and booted to verify that it's not loaded using kextstat. Started a fresh upgrade just nnow and will report bac..

Thank you UDB.. Should I try installing USBMap.kext, but keep the USBInjectAll? UDB and Ed, I downoaded from the Software update utility on the same machine and installing directly. I'll try to start reinstalling again and see how it goes..

I just did and it makes no difference - Boots successfully to Big Sur, but fails to continue upgrade to Sonoma.. Do you think this could result in KP during installation? I thought this is more of a PostInstall step.. I'll def get to fixing it, but not right now if it is not a priority..

I decided to proceed with dGPU. Its working perfectly on Big Sur. VT-d is disabled. I've adapted to standard kexts, except for USBMap.kext. Enabling or disabling NVMeFix.kext doesn't make a difference. I've verified that all the suggestions by Dortina's Coffee Lake settings are in place and...

I can't go iGPU on Big Surm nor can I proceed with Sonoma install.. Anyone?

This is on Big Sur - I didn't set the id before, it was 0300923E. I changed it now and it makes no difference - it sill boots with dGPU :( When I use -wegnoegpu it gets stuck on Apple Start logo with progress bar. When I remove the power to RX570, it doe KP.. I'm not too keen on going iGPU, but...

I disabled it still no luck.. Since I 've RX570, I tried to diable it, but no luck there as well: I tried to boot w/ iGPU using -wegnoegpu it goes in to KP, I tried -amd_no_dgpu_accel it doesn't boot.

I'm stuck, could you please share your config?

@Sniki @trs96 @Asural would you be able to take a look?

the update to Sonoma is aborting after few restarts. Here is the video of the verbose.. What am I missing? Kext list Drivers:

Got my Celeron G4900, swapped the CPU and I was able to update the BIOS to the current 1.19v. Swapped the CPU back to i5-9600K and it booted right back. I used EFI from Dmitriyys with OC069 and installed BigSur. Everything went fine. Booted right up with RX570. Updated OC from 069 to 096...

My plan is the go with current OC and Sonoma 14.1.2 Motherboard: EVGA Z370 Classified K, 134-KS-E379-KR, LGA 1151, Intel Z370, HDMI 2.0, SATA 6Gb/s, USB 3.1, USB 3.0, ATX CPU: Intel Core i5-9600K Coffee Lake 6-Core 3.7 GHz (4.6 GHz Turbo) LGA 1151 (300 Series) 95W BX80684I59600K Desktop...