Contribute
Register

Successfully moved Asus Z490-P, i9 10850 to Ventura 13.6.3

Did you select 'Hard Disks'?.

Screenshot 2024-03-18 at 8.56.01 AM.png
 
frankx86 said:
We are still in the installation phase, The problem is that during the installation phase I don't see any drivers other than the USB stick
Click to expand...
Hello,
But can you see the storages in BIOS Setup ?
Something like this ?

1710780769390.png
 
First of all, I want to thank everyone for the responses and participation. But still nothing. Same problem. I've tried almost all the settings you've suggested, including enabling AppleXcpmCfgLock, and then I also tried disabling SecureBootModel. The only suggestion left is from the moderator, which is to disconnect every driver and try again with just one hard disk. Due to time constraints, I'll give it a try tomorrow. The issue seems to be related to some kext communicating with the hard disks and SATA peripherals, as it detects the USB ports and the installation starts without any issues.

What a stress.
 

Attachments

  • IMG_20240318_182812.jpg
    IMG_20240318_182812.jpg
    4.8 MB · Views: 7
  • IMG_20240318_182840.jpg
    IMG_20240318_182840.jpg
    4 MB · Views: 7
  • IMG_20240318_182847.jpg
    IMG_20240318_182847.jpg
    4.8 MB · Views: 7
frankx86 said:
First of all, I want to thank everyone for the responses and participation. But still nothing. Same problem. I've tried almost all the settings you've suggested, including enabling AppleXcpmCfgLock, and then I also tried disabling SecureBootModel. The only suggestion left is from the moderator, which is to disconnect every driver and try again with just one hard disk. Due to time constraints, I'll give it a try tomorrow. The issue seems to be related to some kext communicating with the hard disks and SATA peripherals, as it detects the USB ports and the installation starts without any issues.

What a stress.
Click to expand...
doesn't a drive get sacrificed when you try and use all ports? are one or two shared?
 
frankx86 said:
Yes, the second M.2 slot and the SATA 6 port share bandwidth. I'm aware of this, but it's not causing any issues for the use I'm making of it. I've never encountered problems on Catalina and Monterey.
Click to expand...
then best to remove all but the drive you want to install on and obviously your usb installer
 
I forgot to mention that I also tried replacing the OpenHfsPlus.efi driver with HfsPlus, which I currently use on Catalina, but it still didn't work
 
frankx86 said:
I forgot to mention that I also tried replacing the OpenHfsPlus.efi driver with HfsPlus, which I currently use on Catalina, but it still didn't work
Click to expand...
well no... that wouldn't make any difference

that is just for viewing mac partitions when formatted and macOS is installed on it
 
Feartech said:
well no... that wouldn't make any difference

that is just for viewing mac partitions when formatted and macOS is installed on it
Click to expand...
So, I tried disconnecting all the hard disks and leaving only the NVMe2 or SSD. No luck, Ventura doesn't detect the hard disks. I've tried both the Catalina and Monterey USB drives, and they work as usual. At this point, I believe the issue lies within the EFI
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top