Contribute
Register

Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

CaseySJ said:
** Ventura 13.3+ Users **​

OpenCore Configurator 2.69.0.1 with 0.9.2 Development Version supports the new DisableIoMapperMapping kernel quirk:
View attachment 565864
Please enable this quirk if you're running Ventura 13.3 or newer and you have more than 16GB memory and your iGPU is enabled.
Click to expand...

So OpenCore 0.9.2 and enabling this new quirk will replace the patch from post #10,360?
 
Hi,
Does anybody know of an external USB drive dock which works with this hackintosh?
I have an old Sabrent with a JMS561U chipset which works very erratically, e.g it mounts but then it dismount after a few second by itself. And the USB is not see anymore
 
bruttonero said:
Hi,
Does anybody know of an external USB drive dock which works with this hackintosh?
I have an old Sabrent with a JMS561U chipset which works very erratically, e.g it mounts but then it dismount after a few second by itself. And the USB is not see anymore
Click to expand...
This is the one I've been using for years without issue:
www.newegg.com

Vantec NexStar Dual Bay 2.5"/3.5" SATA to USB 2.0 & eSATA Hard Drive Dock - Model NST-D200SU - Newegg.com

Buy Vantec NexStar Dual Bay 2.5"/3.5" SATA to USB 2.0 & eSATA Hard Drive Dock - Model NST-D200SU with fast shipping and top-rated customer service. Once you know, you Newegg!
www.newegg.com www.newegg.com
 
iMac 20,2
Z490 Vision D |  i9 Other |  Radeon Nitro+ RX 5700 XT 8GB
Higgie said:
Anyone any closer to figuring out why TB3 hotplug has stopped working on unflashed boards?
Click to expand...
Still looking for an answer to this. Haven’t had much time to experiment but wondering if it could be anything to do with the DMAR and AppleVTD
 
Hi! After upgrading my Z490 Vision D to Monterey, my ProTools is not able to see my HDX-card. Nor is the system able to see the core-audio driver. Catalina worked no issus..Anyone?

Opencore 0.7.4. Used the guide in the beginning of this thread.
 
About i225-V
Tried: Launch AppleVTD, I225-Vmod.zip, but it didn't work until I used appleigc.kext i225-V works fine!
 
When I update to oc 0.8.3 and used the settings in the guide, only USB-2 i working?
Any solution I´m on Monterey 12.6.5 My Machine is GA z490 Vision D
 
giertosan said:
When I update to oc 0.8.3 and used the settings in the guide, only USB-2 i working?
Any solution I´m on Monterey 12.6.5 My Machine is GA z490 Vision D
Click to expand...
Please run Hackintool, select the USB tab, and post a screenshot of that page.
 

Attachments

  • Screenshot 2023-04-22 at 13.00.36.png
    Screenshot 2023-04-22 at 13.00.36.png
    475.1 KB · Views: 24
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top