Recent content by vincydp

Hello everyone! i installed with this efi on my DELL. I can't get the trackpad, keyboard and touch screen to work. Can you help me? I try to attach EFI and my ACPI and ioreg

I help YOU! Write me :)

share your EFI please

now I try with the EFI of CLOVER, so with windows I solve the problem of starting with the rename. Clover does not bore windows. I'll redo the procedure and send you ioreg.

the only setting I had to change in your efi was to activate DisableRTCchecksum because otherwise I have a BIOS PRE bootloader error, è Disable the kext wifi because otherwise the WIFI runs very slowly

I took all your EFI and put it on SSD. Then I repeated the procedure by disconnecting the power cable. Everything works but the rename in ACPI does not start Windows. I still kept the whole EFI intact, but I haven't had any changes. If I turn off the PC and turn it back on, it no longer works...

@NorthAmTransAm Can i try this? ThunderboltReset.kext https://github.com/osy86/ThunderboltReset/releases TbtForcePower.efi https://github.com/al3xtjames/ThunderboltPkg/releases For cold boot?

I had to save the DSDT in DSL because otherwise it would not save for me. Here it is

OK this is IOREG

I tried to start Windows WITHOUT OpenCore. Bypassed OpenCore, and, in any case if I do not turn off the power, the PCIe is not even detected. NOn is an EFI problem I have to understand what is wrong with the card or the BIOS. Thanks for EFI!

I connected the PCIe in 16EX_3 port. What port did you connect it to?

Yes, it is a Asus Prime Z370A-II and boot only macOS. Maybe I solved the problem by connecting the PC to a power strip that I turn off every time. So every time I can simulate the procedure of the power cable being disconnected. Instead, now I also tried the sleep and after waking up the card is...

now repeating the procedure to unplug the power cord has been recognized. it works I just have to understand if it remains stable! I am attaching EFI and ioreg @NorthAmTransAm but at each shutdown the card is not recognized and I have to repeat the procedure with the power supply cable

I use SMBIOS MacPro 1,1.

@northbabyboy after reboot the pcie TB is ON! But the Apollo Twin X not is detected. I use Mojave, i try to install the drivers and after reboot not detected :(