Recent content by ssprod

Greetings, Looking for recommendation on an ethernet card that's natively compatible with Monterey. Completing my installation and have been clearly made aware that my Intel I225-V is not presently supported. Many thanks!

Leesureone.. thanks so much for your assistance. I used your NUC8Clover EFI and the system boots fine with 1 monitor, however if I connect the 2nd display (NUC-USB-c/Monitor-HDMI) the primary monitor shuts off and the 2nd display is on with a black screen. I'm currently running 10.15.5. Do you...

Greetings, currently running 10.15.5 on my NUC8, all works well however I've recently purchased a 2nd display and have connected it USB-C (out) HDMI Display (in). Upon boot, the primary display (HDMI out) turns on but i'm getting erratic behaviour from the 2nd display. If I unplug the USB-c...

Thanks for you patience CaseySJ, got it to boot, but still does not acknowledge or recognize either of the IW Kexts. Heliport shows no device found. Strange, as i'm using the same mobo as you.

Thanks CaseySJ.. I have adjusted as you've suggested, however upon reboot system reports critical error "OC:Cannot use Secure Boot with Any Dmg loading! Halting on critical error

Greetings... I have not had success with the OpenIntelWireless kext(s) and OpenCore 0.6.2. I've tried both, disabled SIP, with and without Heliport. No luck. Heliport doesn't see the device. I can confirm wireless is working with my Windows installation. Any thoughts/suggestions would be most...

Greetings, Followed Rehabman's guide and enjoying the results. All is functional with the exception of screen brightness control. Any assistance would be greatly appreciated. Thanks!

Doesn't boot with HS's EFI folder.. not sure why.

Been running 10.13.6 on my Z600, but would love to know how any1 has gotten 10.14 to stick. I, too, have an RX580. Thanks!

Is RX 540 even supported, natively?

Anyone?

Greetings.. Has anyone attempted a Mojave or H.S. installation on an 8th Gen Intel BoxNUC8i3CYSM? They are currently on sale and may go for it. My concern is the Graphics, which is listed as Radeon 540 (Discrete) although Intel lists integrated as "yes". Don't know if that's in addition to an...

Greetings, USB2.0 port (right side) is fully functional, but I don't suspect USB3.0 is implemented properly, if at all, as when a mouse or HD is plugged into either port (left side), the system doesn't shut down, and immediately restarts, rendering an "improper shutdown" message upon reboot. Any...

Greetings.. Finishing up my 8470P w/ Radeon GPU. All is running well, with the exception of WIFI. Installed a Broadcom 43224 card, as I thought it would be supported as per the guide, however maybe my specific card is not. Thank you.

Greetings.. is there a hope in the heavens that will allow me to implement Thunderbolt2 with my Z600? Thanks.