Recent content by smi

i got the same issue. slide=0 didnt fix anything GA h77m d3h i5 3450 16GB Ram No graphics card

hi, sorry for the late response. AUX is working fine and i dont know why. i didnt change any settings. and yes i get devices like USB microphone or AUX headset. AUX audio is the green port on the back of your MOBO or in the front of your case. usb audio are audio-devices which are plugged in...

Update 05.06.2014: [*=center]Bluetooth works fine out of the box! i used the GMYLE adapter from the buyers guide may 2014. [*=center]for Wifi i used the TP-Link TL-WN881ND. Doesnt work till now. the card cant connect to any network, but shows all of them. All kext i can find dont work. And...

u didnt understand me right. i meant the given text on your screenshot screen ;)

1. Check if BIOS is up to date. 2. Load Default Settings in your BIOS 3. Set sata mode to AHCI not IDE 4. Remove RAM till 4GB or less are left 5. Use bootflag -v and -x 6. Make a screenshot of final screen and post it

the error message says your CPU model is unknown. look for latest BIOS drivers on GA's website, and be sure to turn off VT-D in your BIOS settings, when using a K-CPU. a little bit of reading the text thats given would help aaaaa lot. ;) greets

i would guess your SSD wont make it much longer. save your files and get HD tune and check if your SSD is damaged.

Audio is working just fine, but only USB audio - AUX doesnt work.... any suggestions?

on chimera bootscreen, type in "-v" instead of pressing enter. this is a bootflag. you can see the drivers getting loaded and all other stuff. some other bootflags are: -x : safemode, only loads minimal requirements -PCIRootUID=0 -GraficsEnabler=YES did you uninstall your graficscrad for your...

hey robaroba, i didnt use any DSDT file at all as you can read in the title ;) sorry for the late response :D

Update: I have tested almost all things. Seems like the only thing wich is not working is USB and AUX audio. Not tested Wifi and USB 3.0. I will upadte here, when i get Audio working :thumbup:

[SUCCESS] GA Z87 DS3H, i7 4770, GTX 770 Smi's CustoMac Pro Af​ter two years, i decided to start a new Hackintosh built with the new Haswell CPU's. I decided to share this guide, because i havent seen this mainboard on the Buyers list or in the forum guides. so here are the hardware...

test the single 4GB ramstick from your friend AS LONG as it fits to your MB (check GA website for working ram) i have (as u can tell from my first post) 4x4GB 1066 DDR3 Ram, i tried 16,12,8 and 4 and the installing only succeeded with 4GB ram. also check if u are using the right ramslots on...

can u give some more information about your specs? cpu, ram, graphicscard, are u using OSX 10.8.2 or 10.8.3 etc. there could some hardware components that are not compatible to the software or to other hardware components... i recommend using ONLY 4GB of ram and no graphicscard while...

try to boot OR/AND install ML with only 4 GB of RAM. that worked just fine for me :thumbup: and dont put your graphics card into your system before u can boot into ML without USB drive. plug your graphics in when u need to manage the settings for multibeast.