Recent content by Ploddles

Monterey is now out of Beta and has been officially released. Expect the internet to be slooooow tonight!

The latest beta of OC, 0.7.5, has an option that fixes the Smart Access Memory / Resizable Bar issue, i.e it can be left enabled whether you boot macOS or Windows. I'm sure @CaseySJ will include this in his configs when 0.7.5 is officially released. If you don't want to wait a week or 2 then...

The default is enabled in BIOS. If you have changed bios', or reset the BIOS, then it would have been enabled again.

Do you dual boot Windows by any chance? If so then you will probably have to do a cold reboot after going into Windows and before booting macOS. Windows loads its own firmware onto the bluetooth module when it boots and macOS does not overwrite it with its own firmware. Often only way to clear...

@Vorshim92 Also ensure that the equivalent wake action is disabled in the BIOS.

All Monterey Betas have worked fine for me with these drives.

Why not just use CaseySJ's 0.7.3 EFI that he has graciously supplied? Just put your own serial numbers in.

You may need to set csr-active-config to 00000000 to get it to show.

I can't say I have come across any problems, everything seems to be working as I would expect.

If memory serves me right, in your config.plist file try changing PlatformInfo/UpdateSMBIOSMode from Create to Custom AND Kernel/Quirks/CustomSMBIOSGuid = YES (if using OpenCore Configurator tick the box).

After you have been in Windows, it is often necessary to do a full COLD boot to get Bluetooth and/or Wifi working properly in macOS. Windows installs its own firmware to the BT/Wifi module and the only way to clear it so macOS can install its own version is to cold boot. Simply unplug the...

Plenty of 6700XTs (£650 upwards) & 6600 XTs (£430 upwards) in the UK on the usual sites. Given the current climate that isn't too bad for us. As usual, we are ripped off with the exchange rate of $1=£1 on computer gear :-X. Way more than they MSRP though :thumbdown.

I believe it is a prerequisite for Resizable Bar that Above 4G Decoding has to be enabled first. This is not specific to this MB or BIOS version but to all.

You will get an output from virtually any GPU, be that Nvidia or AMD. But, unless it is a supported one you will only get a basic output using the bog standard VGA driver, i.e no acceleration etc. You can, of course, have both cards installed but just disable the slot the RTX is in when you...

@CaseySJ has kindly supplied SSDTs to disable slot 1 or 2 in THIS thread, in post 1. Add one or the other SSDTs, depending on which slot you put the 1070ti in, to Opencore and enable it in your config.plist file.