Recent content by mistergreen

Yes, they're all mounted in desktop and accesible. I just wondered why Hackintool is not shownig them when mounted. Thanks again, i'll leave it at that.

Wow, Thank you! Your Kext seems to work. I can access all the usbs on the multi panel now, showing up in finder but not in hackintool though. I disabled com.apple.iokit.IOUSBHostFamily and com.apple.driver.usb.AppleUSBXHCI. With the usb 3.1 Type-C I get only gen1 speed (5Gbps), as its not...

Thanks. Here's the USBPorts.kext. I couldn't find the keyboard, which is connected to back Panel top USB2, and the two additional USB3.0 and 3.1-C ports on the multipanel.

I mapped all the usb ports. Then made a USBPorts.kext where i deleted all back panel usbs for testing the front/remaining usb ports, which left me with some 10 ports in the USBPorts.kext. But no succes, also with that setup, i could make only the first in the multipanel work.

Took the easy way - bought DVI to DP adapter.

same problem here, no 2. display on dvi. what settings of my config.plist do i have to change to make it work?

Yes i did, worked out fine. I also have USBInjectAll.kext and Port Limit Removals installed. But i could not detect anything in the usb 3 panel ports, except in the first which works for usb2 and 3.

On my working 10.15 installation i installed a front panel with 3x usb3 and 1x type c ports. I can get only the first usb 3 to work, on ss07/sh07 respectively, with 5Gbps. Its connected to mainboard 20pin usb 3.1 connector, showing up in hackintool on sh08 as usb2 hub. Any clue how to make...

just installed a usb / cardreader panel: https://www.amazon.de/dp/B07V33Z7LT/?tag=tonymacx8603-21 3x usb 3.0, 1x usb type c, card reader via usb2 hub, 1x e-sata . usb 3 is connected via 20pin cable to mainboard (appearing on hs08), but only the first usb port is working, at ss07 with 5gbps and...

hey, i want to move my working catalina installation to a new samsung evo 750 plus nvme. I clone the drive with ccc and copy the efi manually - will that work out or do i need a fresh install? would you suggest keeping system and home dir on 1 big disk or separate them on 2 disks?

followed this guide: https://www.tonymacx86.com/threads/the-everything-works-asus-z390-i-gaming-i7-8700k-sapphire-nitro-radeon-rx-vega-64-build.272572/ and all went well, it seems to be. Sitll wondering though why >advanced Items>Graphics Configuration in Bios is not available, any clue...

Wow, thanks a lot for your guide. Everything seems to work perfectly!

No, i was just using the original EFI. Which one do you suggest?

Not sure if this is the right place to post for support: Just put together my new hack, but got problems with setting up BIOS accordingly. I don't have >Graphics Configuration menu in >Advanced Items. I first started with optimized defaults (as in...

Hey, just put together my new hack, but got problems with setting up bios accordingly. I don't have >Graphics Configuration menu in >Advanced Items. I first started with optimized defaults (as in...