Recent content by lollo78

Mouse bluetooth 5.0 Xiaomi

Of course. I'm doing an NVRAM reset from the OC boot screen at every reboot during my test

Nothing! Same result

@Edhawk thanks a lot for your help and patience. I tried your kexts in the order adviced and performed an NVRAM reset (but I do it always, also if the modify is not related to NVRAM) but it didn't work. Bluetooth stay always on NULL BCM_4350C2. :banghead:

It didn't work. Bluetooth appear always as NULL BCM_4350C2 :cry: I tried also to remap the USB ports in Windows (again!) with USBToolBox but enabling the Apple native classes option (so USBToolbox.kext is not required anymore) but nothing. In attached the new kext. Some specs extracted from...

My BlueTooth is not working, but Wi-Fi works fine. ON/OFF button is only cosmetics. If I set it ON no device are discovered and it go automatically OFF after a while. Yes, the system boot with the revised kext and all the other USB ports works fine, also the webcam. Wi-Fi works, but...

Thx Edhawk, I tried your cleaned kext (with USBTooBox.kext, of course) but it didn't work. BT still not working. Before to install this Intel PCIe card my hackintosh was perfect (all working) with the attached USBPorts.kext. Yes, they are

Yes I got it and for this reason Wi-Fi it was never a problem. The issue for me is Bluetooth and drive me crazy.

Hi guys! Hi @Edhawk, please could you explain how to do this? I installed a PCIe Intel AX210NGW card into my laptop and there is no way to have a Bluetooth working (NULL device find). Before I had a BCM card that worked fine out of the box. I tried a lot of kexts, workaround and so on... but...

Ok, I did it (also if my laptop is the same of the OP).

Just created my EFI folder from scratch with open core 0.75 following @k.kemic advices, but I can't install Catalina. After few minutes from installation the system reboots. I tried also with BigSur, but it freeze during installation at the 13th minute. Did you get the same issue and how you...

I'm trying to create a fresh USB installer of Catalina using OpenCore, but I have black screen on boot. My PC Is now running Sierra with Clover and the GPU works OOB. Now I'm trying to create and USB installer with Clover.

Thank you etorix. I did it but I have always the same issue: black screen after verbose (no HDMI output, but it works fine in miniDP). What I have to do again to fix it in opencore? Thanks a lot.

Hi Gigamaxx, please could you show me an example for the right syntax in opencore? Thanks a lot

Hi guys, I'm trying to install Catalina with Opencore but after verbose I see a black screen on HDMI output. The GUI works only on Displayport. The solution, for me (according OP), seems to be injecting Hamachi framebuffer (instead of Futumaki), but how to do it in opencore? My setup (Legacy...